Copyright © 2004 Free Standards Group
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License".
Portions of the text are copyrighted by the following parties:
The Regents of the University of California
Free Software Foundation
Ian F. Darwin
Paul Vixie
BSDI (now Wind River)
Andrew G Morgan
Jean-loup Gailly and Mark Adler
Massachusetts Institute of Technology
These excerpts are being used in accordance with their respective licenses.
Linux is a trademark of Linus Torvalds.
UNIX a registered trademark of the Open Group in the United States and other countries.
LSB is a trademark of the Free Standards Group in the USA and other countries.
AMD is a trademark of Advanced Micro Devices, Inc.
Intel and Itanium are registered trademarks and Intel386 is a trademarks of Intel Corporation.
OpenGL is a registered trademark of Silicon Graphics, Inc.
This is version 3.0Preview1 of the Linux Standard Base C++ Specification for Itanium™. An implementation of this version of the specification may not claim to be an implementation of the Linux Standard Base unless it has successfully completed the compliance process as defined by the Free Standards Group.
The LSB defines a binary interface for application programs that are compiled and packaged for LSB-conforming implementations on many different hardware architectures. Since a binary specification shall include information specific to the computer processor architecture for which it is intended, it is not possible for a single document to specify the interface for all possible LSB-conforming implementations. Therefore, the LSB is a family of specifications, rather than a single one.
This document should be used in conjunction with the documents it references. This document enumerates the system components it includes, but descriptions of those components may be included entirely or partly in this document, partly in other documents, or entirely in other reference documents. For example, the section that describes system service routines includes a list of the system routines supported in this interface, formal declarations of the data structures they use that are visible to applications, and a pointer to the underlying referenced specification for information about the syntax and semantics of each call. Only those routines not described in standards referenced by this document, or extensions to those standards, are described in the detail. Information referenced in this way is as much a part of this document as is the information explicitly included here.
The specification carries a version number of either the form x.y or x.y.z. This version number carries the following meaning:
The first number (x) is the major version number. All versions with the same major version number should share binary compatibility. Any addition or deletion of a new library results in a new version number. Interfaces marked as deprecated may be removed from the specification at a major version change.
The second number (y) is the minor version number. Individual interfaces may be added if all certified implementations already had that (previously undocumented) interface. Interfaces may be marked as deprecated at a minor version change. Other minor changes may be permitted at the discretion of the LSB workgroup.
The third number (z), if present, is the editorial level. Only editorial changes should be included in such versions.
The Linux Standard Base (LSB) defines a system interface for compiled applications and a minimal environment for support of installation scripts. Its purpose is to enable a uniform industry standard environment for high-volume applications conforming to the LSB.
These specifications are composed of two basic parts: A common specification ("LSB-generic") describing those parts of the interface that remain constant across all implementations of the LSB, and an architecture-specific specification ("LSB-arch") describing the parts of the interface that vary by processor architecture. Together, the LSB-generic and the architecture-specific supplement for a single hardware architecture provide a complete interface specification for compiled application programs on systems that share a common hardware architecture.
The LSB-generic document shall be used in conjunction with an architecture-specific supplement. Whenever a section of the LSB-generic specification shall be supplemented by architecture-specific information, the LSB-generic document includes a reference to the architecture supplement. Architecture supplements may also contain additional information that is not referenced in the LSB-generic document.
The LSB contains both a set of Application Program Interfaces (APIs) and Application Binary Interfaces (ABIs). APIs may appear in the source code of portable applications, while the compiled binary of that application may use the larger set of ABIs. A conforming implementation shall provide all of the ABIs listed here. The compilation system may replace (e.g. by macro definition) certain APIs with calls to one or more of the underlying binary interfaces, and may insert calls to binary interfaces as needed.
The LSB is primarily a binary interface definition. Not all of the source level APIs available to applications may be contained in this specification.
This is the C++ module of the Linux Standards Base (LSB). This module supplements the core interfaces by providing system interfaces, libraries, and a runtime environment for applications built using the C++ programming language. These interfaces provide low-level support for the core constructs of the language, and implement the standard base C++ libraries.
Interfaces described in this module are presented in terms of C++; the binary interfaces will use encoded or mangled versions of the names.
The specifications listed below are referenced in whole or in part by this module of the Linux Standard Base. In this specification, where only a particular section of one of these references is identified, then the normative reference is to that section alone, and the rest of the referenced document is informative.
Table 2-1. Normative References
Name | Title | URL |
---|---|---|
ISO POSIX (2003) | ISO/IEC 9945-1:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 1: Base Definitions ISO/IEC 9945-2:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 2: System Interfaces ISO/IEC 9945-3:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 3: Shell and Utilities ISO/IEC 9945-4:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 4: Rationale Including Technical Cor. 1: 2004 | http://www.unix.org/version3/ |
ISO/IEC 14882: 2003 C++ Language | ISO/IEC 14882: 2003 Programming languages --C++ | |
Itanium C++ ABI | Itanium C++ ABI (Revision: 1.75) | http://www.codesourcery.com/cxx-abi/abi.html |
The libraries listed in Table 3-1 shall be available on a Linux Standard Base system, with the specified runtime names.
These libraries will be in an implementation-defined directory which the dynamic linker shall search by default.
An implementation shall satisfy the following requirements:
The implementation shall implement fully the architecture described in the hardware manual for the target processor architecture.
The implementation shall be capable of executing compiled applications having the format and using the system interfaces described in this document.
The implementation shall provide libraries containing the interfaces specified by this document, and shall provide a dynamic linking mechanism that allows these interfaces to be attached to applications at runtime. All the interfaces shall behave as specified in this document.
The map of virtual memory provided by the implementation shall conform to the requirements of this document.
The implementation's low-level behavior with respect to function call linkage, system traps, signals, and other such activities shall conform to the formats described in this document.
The implementation shall provide all of the mandatory interfaces in their entirety.
The implementation may provide one or more of the optional interfaces. Each optional interface that is provided shall be provided in its entirety. The product documentation shall state which optional interfaces are provided.
The implementation shall provide all files and utilities specified as part of this document in the format defined here and in other referenced documents. All commands and utilities shall behave as required by this document. The implementation shall also provide all mandatory components of an application's runtime environment that are included or referenced in this document.
The implementation, when provided with standard data formats and values at a named interface, shall provide the behavior defined for those values and data formats at that interface. However, a conforming implementation may consist of components which are separately packaged and/or sold. For example, a vendor of a conforming implementation might sell the hardware, operating system, and windowing system as separately packaged items.
The implementation may provide additional interfaces with different names. It may also provide additional behavior corresponding to data values outside the standard ranges, for standard named interfaces.
An application shall satisfy the following requirements:
Its executable files are either shell scripts or object files in the format defined for the Object File Format system interface.
Its object files participate in dynamic linking as defined in the Program Loading and Linking System interface.
It employs only the instructions, traps, and other low-level facilities defined in the Low-Level System interface as being for use by applications.
If it requires any optional interface defined in this document in order to be installed or to execute successfully, the requirement for that optional interface is stated in the application's documentation.
It does not use any interface or data format that is not required to be provided by a conforming implementation, unless:
If such an interface or data format is supplied by another application through direct invocation of that application during execution, that application is in turn an LSB conforming application.
The use of that interface or data format, as well as its source, is identified in the documentation of the application.
It shall not use any values for a named interface that are reserved for vendor extensions.
For the purposes of this document, the following definitions, as specified in the ISO/IEC Directives, Part 2, 2001, 4th Edition, apply:
be able to; there is a possibility of; it is possible to
be unable to; there is no possibilty of; it is not possible to
is permitted; is allowed; is permissible
it is not required that; no...is required
is to; is required to; it is required that; has to; only...is permitted; it is necessary
is not allowed [permitted] [acceptable] [permissible]; is required to be not; is required that...be not; is not to be
it is recommended that; ought to
it is not recommended that; ought not to
For the purposes of this document, the following terms apply:
The architectural part of the LSB Specification which describes the specific parts of the interface that are platform specific. The archLSB is complementary to the gLSB.
The total set of interfaces that are available to be used in the compiled binary code of a conforming application.
The common part of the LSB Specification that describes those parts of the interface that remain constant across all hardware implementations of the LSB.
Describes a value or behavior that is not defined by this document but is selected by an implementor. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence of the value or behavior. An application that relies on such a value or behavior cannot be assured to be portable across conforming implementations. The implementor shall document such a value or behavior so that it can be used correctly by an application.
A file that is read by an interpreter (e.g., awk). The first line of the shell script includes a reference to its interpreter binary.
The set of interfaces that are available to be used in the source code of a conforming application.
Describes the nature of a value or behavior not defined by this document which results from use of an invalid program construct or invalid data input. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations.
Describes the nature of a value or behavior not specified by this document which results from use of a valid program construct or valid data input. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations.
Other terms and definitions used in this document shall have the same meaning as defined in Chapter 3 of the Base Definitions volume of ISO POSIX (2003).
Throughout this document, the following typographic conventions are used:
the name of a function
the name of a command or utility
CONSTANT
a constant value
a parameter
variable
a variable
Throughout this specification, several tables of interfaces are presented. Each entry in these tables has the following format:
the name of the interface
An optional symbol version identifier, if required.
A reference number indexing the table of referenced specifications that follows this table.
For example,
refers to the interface named forkpty() with symbol versionGLIBC_2.0
that is defined in the
first of the listed references below the table.An LSB-conforming implementation shall support base libraries which provide interfaces for accessing the operating system, processor and other hardware in the system.
Only those interfaces that are unique to the Itanium™ platform are defined here. This section should be used in conjunction with the corresponding section in the Linux Standard Base Specification.
Table 7-1 defines the library name and shared object name for the libstdcxx library
The behavior of the interfaces in this library is specified by the following specifications:
Itanium C++ ABI |
ISO/IEC 14882: 2003 C++ Language |
An LSB conforming implementation shall provide the architecture specific methods for C++ Runtime Support specified in Table 7-2, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-2. libstdcxx - C++ Runtime Support Function Interfaces
operator new[](unsigned long)(GLIBCXX_3.4) [1] |
operator new[](unsigned long, nothrow_t const&)(GLIBCXX_3.4) [1] |
operator new(unsigned long)(GLIBCXX_3.4) [1] |
operator new(unsigned long, nothrow_t const&)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
No external methods are defined for libstdcxx - C++ type descriptors for built-in types
No external methods are defined for libstdcxx - C++ Unsorted Interfaces
No external methods are defined for libstdcxx - struct numeric_limits<long double>
No external methods are defined for libstdcxx - struct __numeric_limits_base
No external methods are defined for libstdcxx - struct numeric_limits<long long>
No external methods are defined for libstdcxx - struct numeric_limits<unsigned long long>
No external methods are defined for libstdcxx - struct numeric_limits<float>
No external methods are defined for libstdcxx - struct numeric_limits<double>
No external methods are defined for libstdcxx - struct numeric_limits<short>
No external methods are defined for libstdcxx - struct numeric_limits<unsigned short>
No external methods are defined for libstdcxx - struct numeric_limits<int>
No external methods are defined for libstdcxx - struct numeric_limits<unsigned int>
No external methods are defined for libstdcxx - struct numeric_limits<long>
No external methods are defined for libstdcxx - struct numeric_limits<unsigned long>
No external methods are defined for libstdcxx - struct numeric_limits<wchar_t>
No external methods are defined for libstdcxx - struct numeric_limits<unsigned char>
No external methods are defined for libstdcxx - struct numeric_limits<signed char>
No external methods are defined for libstdcxx - struct numeric_limits<char>
No external methods are defined for libstdcxx - struct numeric_limits<bool>
No external methods are defined for libstdcxx - Class std::allocator<char>
No external methods are defined for libstdcxx - Class std::allocator<wchar_t>
No external methods are defined for libstdcxx - facet functions
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_string specified in Table 7-3, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-3. libstdcxx - Class basic_string Function Interfaces
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_of(wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_of(wchar_t const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_of(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_of(wchar_t, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_of(wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_of(wchar_t const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_of(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_of(wchar_t, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_not_of(wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_not_of(wchar_t const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_not_of(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_last_not_of(wchar_t, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_not_of(wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_not_of(wchar_t const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_not_of(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find_first_not_of(wchar_t, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::at(unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::copy(wchar_t*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find(wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find(wchar_t const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::find(wchar_t, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::rfind(wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::rfind(wchar_t const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::rfind(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::rfind(wchar_t, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::substr(unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::compare(unsigned long, unsigned long, wchar_t const*) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::compare(unsigned long, unsigned long, wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::compare(unsigned long, unsigned long, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::compare(unsigned long, unsigned long, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_M_check(unsigned long, char const*) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_M_limit(unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::operator[](unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_M_limit(unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_S_construct(unsigned long, wchar_t, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_M_replace_aux(unsigned long, unsigned long, unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_M_replace_safe(unsigned long, unsigned long, wchar_t const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::at(unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_Rep::_M_clone(allocator<wchar_t> const&, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_Rep::_S_create(unsigned long, unsigned long, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::erase(unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::append(wchar_t const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::append(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::append(unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::assign(wchar_t const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::assign(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::assign(unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::insert(__gnu_cxx::__normal_iterator<wchar_t*, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > >, unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::insert(unsigned long, wchar_t const*)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::insert(unsigned long, wchar_t const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::insert(unsigned long, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::insert(unsigned long, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::insert(unsigned long, unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::resize(unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::resize(unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::replace(__gnu_cxx::__normal_iterator<wchar_t*, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > >, __gnu_cxx::__normal_iterator<wchar_t*, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > >, wchar_t const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::replace(__gnu_cxx::__normal_iterator<wchar_t*, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > >, __gnu_cxx::__normal_iterator<wchar_t*, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > >, unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::replace(unsigned long, unsigned long, wchar_t const*)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::replace(unsigned long, unsigned long, wchar_t const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::replace(unsigned long, unsigned long, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::replace(unsigned long, unsigned long, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::replace(unsigned long, unsigned long, unsigned long, wchar_t)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::reserve(unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_M_mutate(unsigned long, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(wchar_t const*, unsigned long, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(unsigned long, wchar_t, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(wchar_t const*, unsigned long, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&, unsigned long, unsigned long, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::basic_string(unsigned long, wchar_t, allocator<wchar_t> const&)(GLIBCXX_3.4) [1] |
basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::operator[](unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
No external methods are defined for libstdcxx - Class std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> >
No external methods are defined for libstdcxx - Class std::istreambuf_iterator<char, std::char_traits<char> >
An LSB conforming implementation shall provide the architecture specific methods for Class std::gslice specified in Table 7-4, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-4. libstdcxx - Class gslice Function Interfaces
gslice::_Indexer::_Indexer(unsigned long, valarray<unsigned long> const&, valarray<unsigned long> const&)(GLIBCXX_3.4) [1] |
gslice::_Indexer::_Indexer(unsigned long, valarray<unsigned long> const&, valarray<unsigned long> const&)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::__basic_file<char> specified in Table 7-5, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-5. libstdcxx - Class __basic_file<char> Function Interfaces
__basic_file<char>::xsgetn(char*, long)(GLIBCXX_3.4) [1] |
__basic_file<char>::xsputn(char const*, long)(GLIBCXX_3.4) [1] |
__basic_file<char>::seekoff(long, _Ios_Seekdir)(GLIBCXX_3.4) [1] |
__basic_file<char>::xsputn_2(char const*, long, char const*, long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
No external methods are defined for libstdcxx - Class std::__default_alloc_template<true, 0>
An LSB conforming implementation shall provide the architecture specific methods for Class std::valarray<unsigned int> specified in Table 7-6, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-6. libstdcxx - Class valarray<unsigned int> Function Interfaces
valarray<unsigned long>::size() const(GLIBCXX_3.4) [1] |
valarray<unsigned long>::valarray(valarray<unsigned long> const&)(GLIBCXX_3.4) [1] |
valarray<unsigned long>::valarray(unsigned long)(GLIBCXX_3.4) [1] |
valarray<unsigned long>::valarray(valarray<unsigned long> const&)(GLIBCXX_3.4) [1] |
valarray<unsigned long>::valarray(unsigned long)(GLIBCXX_3.4) [1] |
valarray<unsigned long>::~valarray()(GLIBCXX_3.4) [1] |
valarray<unsigned long>::~valarray()(GLIBCXX_3.4) [1] |
valarray<unsigned long>::operator[](unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_string<char, std::char_traits<char>, std::allocator<char> > specified in Table 7-7, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-7. libstdcxx - Class basic_string<char, char_traits<char>, allocator<char> > Function Interfaces
basic_string<char, char_traits<char>, allocator<char> >::find_last_of(char const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_last_of(char const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_last_of(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_last_of(char, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_of(char const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_of(char const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_of(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_of(char, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_last_not_of(char const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_last_not_of(char const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_last_not_of(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_last_not_of(char, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_not_of(char const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_not_of(char const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_not_of(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find_first_not_of(char, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::at(unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::copy(char*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find(char const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find(char const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::find(char, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::rfind(char const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::rfind(char const*, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::rfind(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::rfind(char, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::substr(unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::compare(unsigned long, unsigned long, char const*) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::compare(unsigned long, unsigned long, char const*, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::compare(unsigned long, unsigned long, basic_string<char, char_traits<char>, allocator<char> > const&) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::compare(unsigned long, unsigned long, basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_M_check(unsigned long, char const*) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::operator[](unsigned long) const(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_S_construct(unsigned long, char, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_M_replace_aux(unsigned long, unsigned long, unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_M_replace_safe(unsigned long, unsigned long, char const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::at(unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_Rep::_M_clone(allocator<char> const&, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_Rep::_S_create(unsigned long, unsigned long, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::erase(unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::append(char const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::append(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::append(unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::assign(char const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::assign(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::assign(unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::insert(__gnu_cxx::__normal_iterator<char*, basic_string<char, char_traits<char>, allocator<char> > >, unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::insert(unsigned long, char const*)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::insert(unsigned long, char const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::insert(unsigned long, basic_string<char, char_traits<char>, allocator<char> > const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::insert(unsigned long, basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::insert(unsigned long, unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::resize(unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::resize(unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::replace(__gnu_cxx::__normal_iterator<char*, basic_string<char, char_traits<char>, allocator<char> > >, __gnu_cxx::__normal_iterator<char*, basic_string<char, char_traits<char>, allocator<char> > >, char const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::replace(__gnu_cxx::__normal_iterator<char*, basic_string<char, char_traits<char>, allocator<char> > >, __gnu_cxx::__normal_iterator<char*, basic_string<char, char_traits<char>, allocator<char> > >, unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::replace(unsigned long, unsigned long, char const*)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::replace(unsigned long, unsigned long, char const*, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::replace(unsigned long, unsigned long, basic_string<char, char_traits<char>, allocator<char> > const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::replace(unsigned long, unsigned long, basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::replace(unsigned long, unsigned long, unsigned long, char)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::reserve(unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::_M_mutate(unsigned long, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(char const*, unsigned long, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(unsigned long, char, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(char const*, unsigned long, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(basic_string<char, char_traits<char>, allocator<char> > const&, unsigned long, unsigned long, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::basic_string(unsigned long, char, allocator<char> const&)(GLIBCXX_3.4) [1] |
basic_string<char, char_traits<char>, allocator<char> >::operator[](unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
No external methods are defined for libstdcxx - Class std::locale
The virtual table for the __cxxabiv1::__enum_type_info class is described by Table 7-8
Table 7-8. Primary vtable for __cxxabiv1::__enum_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__enum_type_info |
vfunc[0]: | __cxxabiv1::__enum_type_info::~__enum_type_info() |
vfunc[1]: | __cxxabiv1::__enum_type_info::~__enum_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
The Run Time Type Information for the __cxxabiv1::__enum_type_info class is described by Table 7-9
No external methods are defined for libstdcxx - Class __cxxabiv1::__enum_type_info
The virtual table for the __cxxabiv1::__array_type_info class is described by Table 7-10
Table 7-10. Primary vtable for __cxxabiv1::__array_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__array_type_info |
vfunc[0]: | __cxxabiv1::__array_type_info::~__array_type_info() |
vfunc[1]: | __cxxabiv1::__array_type_info::~__array_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
The Run Time Type Information for the __cxxabiv1::__array_type_info class is described by Table 7-11
No external methods are defined for libstdcxx - Class __cxxabiv1::__array_type_info
The virtual table for the __cxxabiv1::__class_type_info class is described by Table 7-12
Table 7-12. Primary vtable for __cxxabiv1::__class_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__class_type_info |
vfunc[0]: | __cxxabiv1::__class_type_info::~__class_type_info() |
vfunc[1]: | __cxxabiv1::__class_type_info::~__class_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | __cxxabiv1::__class_type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | __cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
vfunc[6]: | __cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__upcast_result&) const |
vfunc[7]: | __cxxabiv1::__class_type_info::__do_dyncast(long, __cxxabiv1::__class_type_info::__sub_kind, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__dyncast_result&) const |
vfunc[8]: | __cxxabiv1::__class_type_info::__do_find_public_src(long, void const*, __cxxabiv1::__class_type_info const*, void const*) const |
The Run Time Type Information for the __cxxabiv1::__class_type_info class is described by Table 7-13
An LSB conforming implementation shall provide the architecture specific methods for Class __cxxabiv1::__class_type_info specified in Table 7-14, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-14. libstdcxx - Class __cxxabiv1::__class_type_info Function Interfaces
__cxxabiv1::__class_type_info::__do_dyncast(long, __cxxabiv1::__class_type_info::__sub_kind, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__dyncast_result&) const(CXXABI_1.3) [1] |
__cxxabiv1::__class_type_info::__do_find_public_src(long, void const*, __cxxabiv1::__class_type_info const*, void const*) const(CXXABI_1.3) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the __cxxabiv1::__pbase_type_info class is described by Table 7-15
Table 7-15. Primary vtable for __cxxabiv1::__pbase_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__pbase_type_info |
vfunc[0]: | __cxxabiv1::__pbase_type_info::~__pbase_type_info() |
vfunc[1]: | __cxxabiv1::__pbase_type_info::~__pbase_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | __cxxabiv1::__pbase_type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
vfunc[6]: | __cxxabiv1::__pbase_type_info::__pointer_catch(__cxxabiv1::__pbase_type_info const*, void**, unsigned int) const |
The Run Time Type Information for the __cxxabiv1::__pbase_type_info class is described by Table 7-16
No external methods are defined for libstdcxx - Class __cxxabiv1::__pbase_type_info
The virtual table for the __cxxabiv1::__pointer_type_info class is described by Table 7-17
Table 7-17. Primary vtable for __cxxabiv1::__pointer_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__pointer_type_info |
vfunc[0]: | __cxxabiv1::__pointer_type_info::~__pointer_type_info() |
vfunc[1]: | __cxxabiv1::__pointer_type_info::~__pointer_type_info() |
vfunc[2]: | __cxxabiv1::__pointer_type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | __cxxabiv1::__pbase_type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
vfunc[6]: | __cxxabiv1::__pointer_type_info::__pointer_catch(__cxxabiv1::__pbase_type_info const*, void**, unsigned int) const |
The Run Time Type Information for the __cxxabiv1::__pointer_type_info class is described by Table 7-18
No external methods are defined for libstdcxx - Class __cxxabiv1::__pointer_type_info
The virtual table for the __cxxabiv1::__function_type_info class is described by Table 7-19
Table 7-19. Primary vtable for __cxxabiv1::__function_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__function_type_info |
vfunc[0]: | __cxxabiv1::__function_type_info::~__function_type_info() |
vfunc[1]: | __cxxabiv1::__function_type_info::~__function_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | __cxxabiv1::__function_type_info::__is_function_p() const |
vfunc[4]: | type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
The Run Time Type Information for the __cxxabiv1::__function_type_info class is described by Table 7-20
No external methods are defined for libstdcxx - Class __cxxabiv1::__function_type_info
The virtual table for the __cxxabiv1::__si_class_type_info class is described by Table 7-21
Table 7-21. Primary vtable for __cxxabiv1::__si_class_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__si_class_type_info |
vfunc[0]: | __cxxabiv1::__si_class_type_info::~__si_class_type_info() |
vfunc[1]: | __cxxabiv1::__si_class_type_info::~__si_class_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | __cxxabiv1::__class_type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | __cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
vfunc[6]: | __cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__upcast_result&) const |
vfunc[7]: | __cxxabiv1::__si_class_type_info::__do_dyncast(long, __cxxabiv1::__class_type_info::__sub_kind, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__dyncast_result&) const |
vfunc[8]: | __cxxabiv1::__si_class_type_info::__do_find_public_src(long, void const*, __cxxabiv1::__class_type_info const*, void const*) const |
The Run Time Type Information for the __cxxabiv1::__si_class_type_info class is described by Table 7-22
An LSB conforming implementation shall provide the architecture specific methods for Class __cxxabiv1::__si_class_type_info specified in Table 7-23, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-23. libstdcxx - Class __cxxabiv1::__si_class_type_info Function Interfaces
__cxxabiv1::__si_class_type_info::__do_dyncast(long, __cxxabiv1::__class_type_info::__sub_kind, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__dyncast_result&) const(CXXABI_1.3) [1] |
__cxxabiv1::__si_class_type_info::__do_find_public_src(long, void const*, __cxxabiv1::__class_type_info const*, void const*) const(CXXABI_1.3) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the __cxxabiv1::__vmi_class_type_info class is described by Table 7-24
Table 7-24. Primary vtable for __cxxabiv1::__vmi_class_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__vmi_class_type_info |
vfunc[0]: | __cxxabiv1::__vmi_class_type_info::~__vmi_class_type_info() |
vfunc[1]: | __cxxabiv1::__vmi_class_type_info::~__vmi_class_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | __cxxabiv1::__class_type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | __cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
vfunc[6]: | __cxxabiv1::__vmi_class_type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__upcast_result&) const |
vfunc[7]: | __cxxabiv1::__vmi_class_type_info::__do_dyncast(long, __cxxabiv1::__class_type_info::__sub_kind, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__dyncast_result&) const |
vfunc[8]: | __cxxabiv1::__vmi_class_type_info::__do_find_public_src(long, void const*, __cxxabiv1::__class_type_info const*, void const*) const |
The Run Time Type Information for the __cxxabiv1::__vmi_class_type_info class is described by Table 7-25
An LSB conforming implementation shall provide the architecture specific methods for Class __cxxabiv1::__vmi_class_type_info specified in Table 7-26, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-26. libstdcxx - Class __cxxabiv1::__vmi_class_type_info Function Interfaces
__cxxabiv1::__vmi_class_type_info::__do_dyncast(long, __cxxabiv1::__class_type_info::__sub_kind, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info const*, void const*, __cxxabiv1::__class_type_info::__dyncast_result&) const(CXXABI_1.3) [1] |
__cxxabiv1::__vmi_class_type_info::__do_find_public_src(long, void const*, __cxxabiv1::__class_type_info const*, void const*) const(CXXABI_1.3) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the __cxxabiv1::__fundamental_type_info class is described by Table 7-27
Table 7-27. Primary vtable for __cxxabiv1::__fundamental_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__fundamental_type_info |
vfunc[0]: | __cxxabiv1::__fundamental_type_info::~__fundamental_type_info() |
vfunc[1]: | __cxxabiv1::__fundamental_type_info::~__fundamental_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
The Run Time Type Information for the __cxxabiv1::__fundamental_type_info class is described by Table 7-28
No external methods are defined for libstdcxx - Class __cxxabiv1::__fundamental_type_info
The virtual table for the __cxxabiv1::__pointer_to_member_type_info class is described by Table 7-29
Table 7-29. Primary vtable for __cxxabiv1::__pointer_to_member_type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __cxxabiv1::__pointer_to_member_type_info |
vfunc[0]: | __cxxabiv1::__pointer_to_member_type_info::~__pointer_to_member_type_info() |
vfunc[1]: | __cxxabiv1::__pointer_to_member_type_info::~__pointer_to_member_type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | __cxxabiv1::__pbase_type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
vfunc[6]: | __cxxabiv1::__pointer_to_member_type_info::__pointer_catch(__cxxabiv1::__pbase_type_info const*, void**, unsigned int) const |
The Run Time Type Information for the __cxxabiv1::__pointer_to_member_type_info class is described by Table 7-30
No external methods are defined for libstdcxx - Class __cxxabiv1::__pointer_to_member_type_info
The virtual table for the __gnu_cxx::stdio_filebuf<char, std::char_traits<char> > class is described by Table 7-31
Table 7-31. Primary vtable for __gnu_cxx::stdio_sync_filebuf<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __gnu_cxx::stdio_sync_filebuf<char, char_traits<char> > |
vfunc[0]: | Unspecified |
vfunc[1]: | Unspecified |
vfunc[2]: | basic_streambuf<char, char_traits<char> >::imbue(locale const&) |
vfunc[3]: | basic_streambuf<char, char_traits<char> >::setbuf(char*, long) |
vfunc[4]: | basic_filebuf<char, char_traits<char> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | basic_filebuf<char, char_traits<char> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_filebuf<char, char_traits<char> >::sync() |
vfunc[7]: | basic_streambuf<char, char_traits<char> >::showmanyc() |
vfunc[8]: | basic_filebuf<char, char_traits<char> >::xsgetn(char*, long) |
vfunc[9]: | basic_filebuf<char, char_traits<char> >::underflow() |
vfunc[10]: | basic_streambuf<char, char_traits<char> >::uflow() |
vfunc[11]: | basic_filebuf<char, char_traits<char> >::pbackfail(int) |
vfunc[12]: | basic_filebuf<char, char_traits<char> >::xsputn(char const*, long) |
vfunc[13]: | basic_filebuf<char, char_traits<char> >::overflow(int) |
No external methods are defined for libstdcxx - Class __gnu_cxx::stdio_filebuf<char, std::char_traits<char> >
The virtual table for the __gnu_cxx::stdio_filebuf<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-32
Table 7-32. Primary vtable for __gnu_cxx::stdio_sync_filebuf<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __gnu_cxx::stdio_sync_filebuf<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | Unspecified |
vfunc[1]: | Unspecified |
vfunc[2]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::imbue(locale const&) |
vfunc[3]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::setbuf(wchar_t*, long) |
vfunc[4]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::setbuf(wchar_t*, long) |
vfunc[5]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::sync() |
vfunc[7]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::showmanyc() |
vfunc[8]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::xsgetn(wchar_t*, long) |
vfunc[9]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::underflow() |
vfunc[10]: | basic_streambuf<char, char_traits<char> >::uflow() |
vfunc[11]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::pbackfail(unsigned int) |
vfunc[12]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::xsputn(wchar_t const*, long) |
vfunc[13]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::overflow(unsigned int) |
No external methods are defined for libstdcxx - Class __gnu_cxx::stdio_filebuf<wchar_t, std::char_traits<wchar_t> >
The virtual table for the std::locale::facet class is described by Table 7-33
Table 7-33. Primary vtable for locale::facet
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for locale::facet |
vfunc[0]: | locale::facet::~facet() |
vfunc[1]: | locale::facet::~facet() |
The Run Time Type Information for the std::locale::facet class is described by Table 7-34
No external methods are defined for libstdcxx - Class std::locale::facet
The virtual table for the std::ios_base::failure class is described by Table 7-35
Table 7-35. Primary vtable for ios_base::failure
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for ios_base::failure |
vfunc[0]: | ios_base::failure::~failure() |
vfunc[1]: | ios_base::failure::~failure() |
vfunc[2]: | ios_base::failure::what() const |
The Run Time Type Information for the std::ios_base::failure class is described by Table 7-36
No external methods are defined for libstdcxx - Class std::ios_base::failure
The virtual table for the std::basic_iostream<char, std::char_traits<char> > class is described by Table 7-37
Table 7-37. Primary vtable for basic_iostream<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 24 |
RTTI | typeinfo for basic_iostream<char, char_traits<char> > |
vfunc[0]: | basic_iostream<char, char_traits<char> >::~basic_iostream() |
vfunc[1]: | basic_iostream<char, char_traits<char> >::~basic_iostream() |
Table 7-38. Secondary vtable for basic_iostream<char, char_traits<char> >
Base Offset | -16 |
Virtual Base Offset | 8 |
RTTI | typeinfo for basic_iostream<char, char_traits<char> > |
vfunc[0]: | non-virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream() |
vfunc[1]: | non-virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream() |
Table 7-39. Secondary vtable for basic_iostream<char, char_traits<char> >
Base Offset | -24 |
Virtual Base Offset | -24 |
RTTI | typeinfo for basic_iostream<char, char_traits<char> > |
vfunc[0]: | virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream() |
vfunc[1]: | virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream() |
The VTT for the std::basic_iostream<char, std::char_traits<char> > class is described by Table 7-40
An LSB conforming implementation shall provide the architecture specific methods for Class _ZSdE specified in Table 7-41, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-41. libstdcxx - Class _ZSdE Function Interfaces
non-virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream()(GLIBCXX_3.4) [1] |
non-virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_iostream<char, char_traits<char> >::~basic_iostream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_istream<char, std::char_traits<char> > class is described by Table 7-42
Table 7-42. Primary vtable for basic_istream<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 16 |
RTTI | typeinfo for basic_istream<char, char_traits<char> > |
vfunc[0]: | basic_istream<char, char_traits<char> >::~basic_istream() |
vfunc[1]: | basic_istream<char, char_traits<char> >::~basic_istream() |
Table 7-43. Secondary vtable for basic_istream<char, char_traits<char> >
Base Offset | -16 |
Virtual Base Offset | -16 |
RTTI | typeinfo for basic_istream<char, char_traits<char> > |
vfunc[0]: | virtual thunk to basic_istream<char, char_traits<char> >::~basic_istream() |
vfunc[1]: | virtual thunk to basic_istream<char, char_traits<char> >::~basic_istream() |
The VTT for the std::basic_istream<char, std::char_traits<char> > class is described by Table 7-44
An LSB conforming implementation shall provide the architecture specific methods for Class _ZSiE specified in Table 7-45, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-45. libstdcxx - Class _ZSiE Function Interfaces
basic_istream<char, char_traits<char> >::get(char*, long)(GLIBCXX_3.4) [1] |
basic_istream<char, char_traits<char> >::get(char*, long, char)(GLIBCXX_3.4) [1] |
basic_istream<char, char_traits<char> >::read(char*, long)(GLIBCXX_3.4) [1] |
basic_istream<char, char_traits<char> >::seekg(long, _Ios_Seekdir)(GLIBCXX_3.4) [1] |
basic_istream<char, char_traits<char> >::ignore(long, int)(GLIBCXX_3.4) [1] |
basic_istream<char, char_traits<char> >::getline(char*, long)(GLIBCXX_3.4) [1] |
basic_istream<char, char_traits<char> >::getline(char*, long, char)(GLIBCXX_3.4) [1] |
basic_istream<char, char_traits<char> >::readsome(char*, long)(GLIBCXX_3.4) [1] |
virtual thunk to basic_istream<char, char_traits<char> >::~basic_istream()(GLIBCXX_3.4) [2] |
virtual thunk to basic_istream<char, char_traits<char> >::~basic_istream()(GLIBCXX_3.4) [2] |
Referenced Specification(s)
[2]. Itanium C++ ABI
The virtual table for the std::basic_ostream<char, std::char_traits<char> > class is described by Table 7-46
Table 7-46. Primary vtable for basic_ostream<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 8 |
RTTI | typeinfo for basic_ostream<char, char_traits<char> > |
vfunc[0]: | basic_ostream<char, char_traits<char> >::~basic_ostream() |
vfunc[1]: | basic_ostream<char, char_traits<char> >::~basic_ostream() |
Table 7-47. Secondary vtable for basic_ostream<char, char_traits<char> >
Base Offset | -8 |
Virtual Base Offset | -8 |
RTTI | typeinfo for basic_ostream<char, char_traits<char> > |
vfunc[0]: | virtual thunk to basic_ostream<char, char_traits<char> >::~basic_ostream() |
vfunc[1]: | virtual thunk to basic_ostream<char, char_traits<char> >::~basic_ostream() |
The VTT for the std::basic_ostream<char, std::char_traits<char> > class is described by Table 7-48
An LSB conforming implementation shall provide the architecture specific methods for Class _ZSoE specified in Table 7-49, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-49. libstdcxx - Class _ZSoE Function Interfaces
basic_ostream<char, char_traits<char> >::seekp(long, _Ios_Seekdir)(GLIBCXX_3.4) [1] |
basic_ostream<char, char_traits<char> >::write(char const*, long)(GLIBCXX_3.4) [1] |
basic_ostream<char, char_traits<char> >::_M_write(char const*, long)(GLIBCXX_3.4) [1] |
virtual thunk to basic_ostream<char, char_traits<char> >::~basic_ostream()(GLIBCXX_3.4) [2] |
virtual thunk to basic_ostream<char, char_traits<char> >::~basic_ostream()(GLIBCXX_3.4) [2] |
Referenced Specification(s)
[2]. Itanium C++ ABI
The Run Time Type Information for the std::__num_base class is described by Table 7-50
No external methods are defined for libstdcxx - Class std::__num_base
The virtual table for the std::bad_typeid class is described by Table 7-51
Table 7-51. Primary vtable for bad_typeid
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for bad_typeid |
vfunc[0]: | bad_typeid::~bad_typeid() |
vfunc[1]: | bad_typeid::~bad_typeid() |
vfunc[2]: | exception::what() const |
The Run Time Type Information for the std::bad_typeid class is described by Table 7-52
No external methods are defined for libstdcxx - Class std::bad_typeid
The Run Time Type Information for the std::ctype_base class is described by Table 7-53
No external methods are defined for libstdcxx - Class std::ctype_base
The virtual table for the std::istrstream class is described by Table 7-54
Table 7-54. Primary vtable for istrstream
Base Offset | 0 |
Virtual Base Offset | 104 |
RTTI | typeinfo for istrstream |
vfunc[0]: | istrstream::~istrstream() |
vfunc[1]: | istrstream::~istrstream() |
Table 7-55. Secondary vtable for istrstream
Base Offset | -104 |
Virtual Base Offset | -104 |
RTTI | typeinfo for istrstream |
vfunc[0]: | virtual thunk to istrstream::~istrstream() |
vfunc[1]: | virtual thunk to istrstream::~istrstream() |
The VTT for the std::istrstream class is described by Table 7-56
An LSB conforming implementation shall provide the architecture specific methods for Class std::istrstream specified in Table 7-57, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-57. libstdcxx - Class istrstream Function Interfaces
istrstream::istrstream(char const*, long)(GLIBCXX_3.4) [1] |
istrstream::istrstream(char*, long)(GLIBCXX_3.4) [1] |
istrstream::istrstream(char const*, long)(GLIBCXX_3.4) [1] |
istrstream::istrstream(char*, long)(GLIBCXX_3.4) [1] |
virtual thunk to istrstream::~istrstream()(GLIBCXX_3.4) [2] |
virtual thunk to istrstream::~istrstream()(GLIBCXX_3.4) [2] |
Referenced Specification(s)
[2]. Itanium C++ ABI
The Run Time Type Information for the std::money_base class is described by Table 7-58
No external methods are defined for libstdcxx - Class std::money_base
The virtual table for the std::moneypunct<char, false> class is described by Table 7-59
Table 7-59. Primary vtable for moneypunct<char, false>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct<char, false> |
vfunc[0]: | moneypunct<char, false>::~moneypunct() |
vfunc[1]: | moneypunct<char, false>::~moneypunct() |
vfunc[2]: | moneypunct<char, false>::do_decimal_point() const |
vfunc[3]: | moneypunct<char, false>::do_thousands_sep() const |
vfunc[4]: | moneypunct<char, false>::do_grouping() const |
vfunc[5]: | moneypunct<char, false>::do_curr_symbol() const |
vfunc[6]: | moneypunct<char, false>::do_positive_sign() const |
vfunc[7]: | moneypunct<char, false>::do_negative_sign() const |
vfunc[8]: | moneypunct<char, false>::do_frac_digits() const |
vfunc[9]: | moneypunct<char, false>::do_pos_format() const |
vfunc[10]: | moneypunct<char, false>::do_neg_format() const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct<char, false> specified in Table 7-60, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-60. libstdcxx - Class moneypunct<char, false> Function Interfaces
moneypunct<char, false>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, false>::moneypunct(__moneypunct_cache<char, false>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, false>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, false>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, false>::moneypunct(__moneypunct_cache<char, false>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, false>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::moneypunct<char, true> class is described by Table 7-61
Table 7-61. Primary vtable for moneypunct<char, true>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct<char, true> |
vfunc[0]: | moneypunct<char, true>::~moneypunct() |
vfunc[1]: | moneypunct<char, true>::~moneypunct() |
vfunc[2]: | moneypunct<char, true>::do_decimal_point() const |
vfunc[3]: | moneypunct<char, true>::do_thousands_sep() const |
vfunc[4]: | moneypunct<char, true>::do_grouping() const |
vfunc[5]: | moneypunct<char, true>::do_curr_symbol() const |
vfunc[6]: | moneypunct<char, true>::do_positive_sign() const |
vfunc[7]: | moneypunct<char, true>::do_negative_sign() const |
vfunc[8]: | moneypunct<char, true>::do_frac_digits() const |
vfunc[9]: | moneypunct<char, true>::do_pos_format() const |
vfunc[10]: | moneypunct<char, true>::do_neg_format() const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct<char, true> specified in Table 7-62, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-62. libstdcxx - Class moneypunct<char, true> Function Interfaces
moneypunct<char, true>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, true>::moneypunct(__moneypunct_cache<char, true>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, true>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, true>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, true>::moneypunct(__moneypunct_cache<char, true>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<char, true>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::moneypunct<wchar_t, false> class is described by Table 7-63
Table 7-63. Primary vtable for moneypunct<wchar_t, false>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct<wchar_t, false> |
vfunc[0]: | moneypunct<wchar_t, false>::~moneypunct() |
vfunc[1]: | moneypunct<wchar_t, false>::~moneypunct() |
vfunc[2]: | moneypunct<wchar_t, false>::do_decimal_point() const |
vfunc[3]: | moneypunct<wchar_t, false>::do_thousands_sep() const |
vfunc[4]: | moneypunct<wchar_t, false>::do_grouping() const |
vfunc[5]: | moneypunct<wchar_t, false>::do_curr_symbol() const |
vfunc[6]: | moneypunct<wchar_t, false>::do_positive_sign() const |
vfunc[7]: | moneypunct<wchar_t, false>::do_negative_sign() const |
vfunc[8]: | moneypunct<wchar_t, false>::do_frac_digits() const |
vfunc[9]: | moneypunct<wchar_t, false>::do_pos_format() const |
vfunc[10]: | moneypunct<wchar_t, false>::do_neg_format() const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct<wchar_t, false> specified in Table 7-64, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-64. libstdcxx - Class moneypunct<wchar_t, false> Function Interfaces
moneypunct<wchar_t, false>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, false>::moneypunct(__moneypunct_cache<wchar_t, false>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, false>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, false>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, false>::moneypunct(__moneypunct_cache<wchar_t, false>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, false>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::moneypunct<wchar_t, true> class is described by Table 7-65
Table 7-65. Primary vtable for moneypunct<wchar_t, true>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct<wchar_t, true> |
vfunc[0]: | moneypunct<wchar_t, true>::~moneypunct() |
vfunc[1]: | moneypunct<wchar_t, true>::~moneypunct() |
vfunc[2]: | moneypunct<wchar_t, true>::do_decimal_point() const |
vfunc[3]: | moneypunct<wchar_t, true>::do_thousands_sep() const |
vfunc[4]: | moneypunct<wchar_t, true>::do_grouping() const |
vfunc[5]: | moneypunct<wchar_t, true>::do_curr_symbol() const |
vfunc[6]: | moneypunct<wchar_t, true>::do_positive_sign() const |
vfunc[7]: | moneypunct<wchar_t, true>::do_negative_sign() const |
vfunc[8]: | moneypunct<wchar_t, true>::do_frac_digits() const |
vfunc[9]: | moneypunct<wchar_t, true>::do_pos_format() const |
vfunc[10]: | moneypunct<wchar_t, true>::do_neg_format() const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct<wchar_t, true> specified in Table 7-66, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-66. libstdcxx - Class moneypunct<wchar_t, true> Function Interfaces
moneypunct<wchar_t, true>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, true>::moneypunct(__moneypunct_cache<wchar_t, true>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, true>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, true>::moneypunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, true>::moneypunct(__moneypunct_cache<wchar_t, true>*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct<wchar_t, true>::moneypunct(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::ostrstream class is described by Table 7-67
Table 7-67. Primary vtable for ostrstream
Base Offset | 0 |
Virtual Base Offset | 96 |
RTTI | typeinfo for ostrstream |
vfunc[0]: | ostrstream::~ostrstream() |
vfunc[1]: | ostrstream::~ostrstream() |
Table 7-68. Secondary vtable for ostrstream
Base Offset | -96 |
Virtual Base Offset | -96 |
RTTI | typeinfo for ostrstream |
vfunc[0]: | virtual thunk to ostrstream::~ostrstream() |
vfunc[1]: | virtual thunk to ostrstream::~ostrstream() |
The VTT for the std::ostrstream class is described by Table 7-69
An LSB conforming implementation shall provide the architecture specific methods for Class std::ostrstream specified in Table 7-70, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-70. libstdcxx - Class ostrstream Function Interfaces
virtual thunk to ostrstream::~ostrstream()(GLIBCXX_3.4) [1] |
virtual thunk to ostrstream::~ostrstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::__timepunct<char> class is described by Table 7-71
Table 7-71. Primary vtable for __timepunct<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __timepunct<char> |
vfunc[0]: | __timepunct<char>::~__timepunct() |
vfunc[1]: | __timepunct<char>::~__timepunct() |
The Run Time Type Information for the std::__timepunct<char> class is described by Table 7-72
An LSB conforming implementation shall provide the architecture specific methods for Class std::__timepunct<char> specified in Table 7-73, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-73. libstdcxx - Class __timepunct<char> Function Interfaces
__timepunct<char>::_M_put(char*, unsigned long, char const*, tm const*) const(GLIBCXX_3.4) [1] |
__timepunct<char>::__timepunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<char>::__timepunct(__timepunct_cache<char>*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<char>::__timepunct(unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<char>::__timepunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<char>::__timepunct(__timepunct_cache<char>*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<char>::__timepunct(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::__timepunct<wchar_t> class is described by Table 7-74
Table 7-74. Primary vtable for __timepunct<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __timepunct<wchar_t> |
vfunc[0]: | __timepunct<wchar_t>::~__timepunct() |
vfunc[1]: | __timepunct<wchar_t>::~__timepunct() |
The Run Time Type Information for the std::__timepunct<wchar_t> class is described by Table 7-75
An LSB conforming implementation shall provide the architecture specific methods for Class std::__timepunct<wchar_t> specified in Table 7-76, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-76. libstdcxx - Class __timepunct<wchar_t> Function Interfaces
__timepunct<wchar_t>::_M_put(wchar_t*, unsigned long, wchar_t const*, tm const*) const(GLIBCXX_3.4) [1] |
__timepunct<wchar_t>::__timepunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<wchar_t>::__timepunct(__timepunct_cache<wchar_t>*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<wchar_t>::__timepunct(unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<wchar_t>::__timepunct(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<wchar_t>::__timepunct(__timepunct_cache<wchar_t>*, unsigned long)(GLIBCXX_3.4) [1] |
__timepunct<wchar_t>::__timepunct(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::logic_error class is described by Table 7-77
Table 7-77. Primary vtable for logic_error
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for logic_error |
vfunc[0]: | logic_error::~logic_error() |
vfunc[1]: | logic_error::~logic_error() |
vfunc[2]: | logic_error::what() const |
The Run Time Type Information for the std::logic_error class is described by Table 7-78
No external methods are defined for libstdcxx - Class std::logic_error
The virtual table for the std::range_error class is described by Table 7-79
Table 7-79. Primary vtable for range_error
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for range_error |
vfunc[0]: | range_error::~range_error() |
vfunc[1]: | range_error::~range_error() |
vfunc[2]: | runtime_error::what() const |
The Run Time Type Information for the std::range_error class is described by Table 7-80
No external methods are defined for libstdcxx - Class std::range_error
The Run Time Type Information for the std::codecvt_base class is described by Table 7-81
No external methods are defined for libstdcxx - Class std::codecvt_base
The virtual table for the std::ctype_byname<char> class is described by Table 7-82
Table 7-82. Primary vtable for ctype_byname<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for ctype_byname<char> |
vfunc[0]: | ctype_byname<char>::~ctype_byname() |
vfunc[1]: | ctype_byname<char>::~ctype_byname() |
vfunc[2]: | ctype<char>::do_toupper(char) const |
vfunc[3]: | ctype<char>::do_toupper(char*, char const*) const |
vfunc[4]: | ctype<char>::do_tolower(char) const |
vfunc[5]: | ctype<char>::do_tolower(char*, char const*) const |
vfunc[6]: | ctype<char>::do_widen(char) const |
vfunc[7]: | ctype<char>::do_widen(char const*, char const*, char*) const |
vfunc[8]: | ctype<char>::do_narrow(char, char) const |
vfunc[9]: | ctype<char>::do_narrow(char const*, char const*, char, char*) const |
The Run Time Type Information for the std::ctype_byname<char> class is described by Table 7-83
An LSB conforming implementation shall provide the architecture specific methods for Class std::ctype_byname<char> specified in Table 7-84, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-84. libstdcxx - Class ctype_byname<char> Function Interfaces
ctype_byname<char>::ctype_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
ctype_byname<char>::ctype_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::ctype_byname<wchar_t> specified in Table 7-85, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-85. libstdcxx - Class ctype_byname<wchar_t> Function Interfaces
ctype_byname<wchar_t>::ctype_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
ctype_byname<wchar_t>::ctype_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::domain_error class is described by Table 7-86
Table 7-86. Primary vtable for domain_error
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for domain_error |
vfunc[0]: | domain_error::~domain_error() |
vfunc[1]: | domain_error::~domain_error() |
vfunc[2]: | logic_error::what() const |
The Run Time Type Information for the std::domain_error class is described by Table 7-87
No external methods are defined for libstdcxx - Class std::domain_error
The virtual table for the std::length_error class is described by Table 7-88
Table 7-88. Primary vtable for length_error
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for length_error |
vfunc[0]: | length_error::~length_error() |
vfunc[1]: | length_error::~length_error() |
vfunc[2]: | logic_error::what() const |
The Run Time Type Information for the std::length_error class is described by Table 7-89
No external methods are defined for libstdcxx - Class std::length_error
The virtual table for the std::out_of_range class is described by Table 7-90
Table 7-90. Primary vtable for out_of_range
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for out_of_range |
vfunc[0]: | out_of_range::~out_of_range() |
vfunc[1]: | out_of_range::~out_of_range() |
vfunc[2]: | logic_error::what() const |
The Run Time Type Information for the std::out_of_range class is described by Table 7-91
No external methods are defined for libstdcxx - Class std::out_of_range
The virtual table for the std::strstreambuf class is described by Table 7-92
Table 7-92. Primary vtable for strstreambuf
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for strstreambuf |
vfunc[0]: | strstreambuf::~strstreambuf() |
vfunc[1]: | strstreambuf::~strstreambuf() |
vfunc[2]: | basic_streambuf<char, char_traits<char> >::imbue(locale const&) |
vfunc[3]: | strstreambuf::setbuf(char*, long) |
vfunc[4]: | strstreambuf::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | strstreambuf::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_streambuf<char, char_traits<char> >::sync() |
vfunc[7]: | basic_streambuf<char, char_traits<char> >::showmanyc() |
vfunc[8]: | basic_streambuf<char, char_traits<char> >::xsgetn(char*, long) |
vfunc[9]: | strstreambuf::underflow() |
vfunc[10]: | basic_streambuf<char, char_traits<char> >::uflow() |
vfunc[11]: | strstreambuf::pbackfail(int) |
vfunc[12]: | basic_streambuf<char, char_traits<char> >::xsputn(char const*, long) |
vfunc[13]: | strstreambuf::overflow(int) |
The Run Time Type Information for the std::strstreambuf class is described by Table 7-93
An LSB conforming implementation shall provide the architecture specific methods for Class std::strstreambuf specified in Table 7-94, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-94. libstdcxx - Class strstreambuf Function Interfaces
strstreambuf::setbuf(char*, long)(GLIBCXX_3.4) [1] |
strstreambuf::seekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
strstreambuf::_M_alloc(unsigned long)(GLIBCXX_3.4) [1] |
strstreambuf::_M_setup(char*, char*, long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(void* (*)(unsigned long), void (*)(void*))(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(signed char const*, long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(char const*, long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(unsigned char const*, long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(signed char*, long, signed char*)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(char*, long, char*)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(unsigned char*, long, unsigned char*)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(void* (*)(unsigned long), void (*)(void*))(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(signed char const*, long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(char const*, long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(unsigned char const*, long)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(signed char*, long, signed char*)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(char*, long, char*)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(unsigned char*, long, unsigned char*)(GLIBCXX_3.4) [1] |
strstreambuf::strstreambuf(long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::bad_exception class is described by Table 7-95
Table 7-95. Primary vtable for bad_exception
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for bad_exception |
vfunc[0]: | bad_exception::~bad_exception() |
vfunc[1]: | bad_exception::~bad_exception() |
vfunc[2]: | exception::what() const |
The Run Time Type Information for the std::bad_exception class is described by Table 7-96
No external methods are defined for libstdcxx - Class std::bad_exception
The virtual table for the std::basic_filebuf<char, std::char_traits<char> > class is described by Table 7-97
Table 7-97. Primary vtable for basic_filebuf<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for basic_filebuf<char, char_traits<char> > |
vfunc[0]: | basic_filebuf<char, char_traits<char> >::~basic_filebuf() |
vfunc[1]: | basic_filebuf<char, char_traits<char> >::~basic_filebuf() |
vfunc[2]: | basic_filebuf<char, char_traits<char> >::imbue(locale const&) |
vfunc[3]: | basic_filebuf<char, char_traits<char> >::setbuf(char*, long) |
vfunc[4]: | basic_filebuf<char, char_traits<char> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | basic_filebuf<char, char_traits<char> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_filebuf<char, char_traits<char> >::sync() |
vfunc[7]: | basic_filebuf<char, char_traits<char> >::showmanyc() |
vfunc[8]: | basic_filebuf<char, char_traits<char> >::xsgetn(char*, long) |
vfunc[9]: | basic_filebuf<char, char_traits<char> >::underflow() |
vfunc[10]: | basic_streambuf<char, char_traits<char> >::uflow() |
vfunc[11]: | basic_filebuf<char, char_traits<char> >::pbackfail(int) |
vfunc[12]: | basic_filebuf<char, char_traits<char> >::xsputn(char const*, long) |
vfunc[13]: | basic_filebuf<char, char_traits<char> >::overflow(int) |
The Run Time Type Information for the std::basic_filebuf<char, std::char_traits<char> > class is described by Table 7-98
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_filebuf<char, std::char_traits<char> > specified in Table 7-99, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-99. libstdcxx - Class basic_filebuf<char, char_traits<char> > Function Interfaces
basic_filebuf<char, char_traits<char> >::_M_set_buffer(long)(GLIBCXX_3.4) [1] |
basic_filebuf<char, char_traits<char> >::_M_convert_to_external(char*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<char, char_traits<char> >::setbuf(char*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<char, char_traits<char> >::xsgetn(char*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<char, char_traits<char> >::xsputn(char const*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<char, char_traits<char> >::_M_seek(long, _Ios_Seekdir, __mbstate_t)(GLIBCXX_3.4) [1] |
basic_filebuf<char, char_traits<char> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::basic_filebuf<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-100
Table 7-100. Primary vtable for basic_filebuf<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for basic_filebuf<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::~basic_filebuf() |
vfunc[1]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::~basic_filebuf() |
vfunc[2]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::imbue(locale const&) |
vfunc[3]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::setbuf(wchar_t*, long) |
vfunc[4]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::sync() |
vfunc[7]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::showmanyc() |
vfunc[8]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::xsgetn(wchar_t*, long) |
vfunc[9]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::underflow() |
vfunc[10]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::uflow() |
vfunc[11]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::pbackfail(unsigned int) |
vfunc[12]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::xsputn(wchar_t const*, long) |
vfunc[13]: | basic_filebuf<wchar_t, char_traits<wchar_t> >::overflow(unsigned int) |
The Run Time Type Information for the std::basic_filebuf<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-101
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_filebuf<wchar_t, std::char_traits<wchar_t> > specified in Table 7-102, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-102. libstdcxx - Class basic_filebuf<wchar_t, char_traits<wchar_t> > Function Interfaces
basic_filebuf<wchar_t, char_traits<wchar_t> >::_M_set_buffer(long)(GLIBCXX_3.4) [1] |
basic_filebuf<wchar_t, char_traits<wchar_t> >::_M_convert_to_external(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<wchar_t, char_traits<wchar_t> >::setbuf(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<wchar_t, char_traits<wchar_t> >::xsgetn(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<wchar_t, char_traits<wchar_t> >::xsputn(wchar_t const*, long)(GLIBCXX_3.4) [1] |
basic_filebuf<wchar_t, char_traits<wchar_t> >::_M_seek(long, _Ios_Seekdir, __mbstate_t)(GLIBCXX_3.4) [1] |
basic_filebuf<wchar_t, char_traits<wchar_t> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
basic_ostream<wchar_t, char_traits<wchar_t> >::_M_write(wchar_t const*, long)(GLIBCXX_3.4) [1] |
virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream()(GLIBCXX_3.4) [2] |
Referenced Specification(s)
[2]. Itanium C++ ABI
The virtual table for the std::basic_fstream<char, std::char_traits<char> > class is described by Table 7-103
Table 7-103. Primary vtable for basic_fstream<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 264 |
RTTI | typeinfo for basic_fstream<char, char_traits<char> > |
vfunc[0]: | basic_fstream<char, char_traits<char> >::~basic_fstream() |
vfunc[1]: | basic_fstream<char, char_traits<char> >::~basic_fstream() |
Table 7-104. Secondary vtable for basic_fstream<char, char_traits<char> >
Base Offset | -16 |
Virtual Base Offset | 248 |
RTTI | typeinfo for basic_fstream<char, char_traits<char> > |
vfunc[0]: | non-virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream() |
vfunc[1]: | non-virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream() |
Table 7-105. Secondary vtable for basic_fstream<char, char_traits<char> >
Base Offset | -264 |
Virtual Base Offset | -264 |
RTTI | typeinfo for basic_fstream<char, char_traits<char> > |
vfunc[0]: | virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream() |
vfunc[1]: | virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream() |
The VTT for the std::basic_fstream<char, std::char_traits<char> > class is described by Table 7-106
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_fstream<char, std::char_traits<char> > specified in Table 7-107, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-107. libstdcxx - Class basic_fstream<char, char_traits<char> > Function Interfaces
non-virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream()(GLIBCXX_3.4) [1] |
non-virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_fstream<char, char_traits<char> >::~basic_fstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_fstream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-108
Table 7-108. Primary vtable for basic_fstream<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 264 |
RTTI | typeinfo for basic_fstream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream() |
vfunc[1]: | basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream() |
Table 7-109. Secondary vtable for basic_fstream<wchar_t, char_traits<wchar_t> >
Base Offset | -16 |
Virtual Base Offset | 248 |
RTTI | typeinfo for basic_fstream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | non-virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream() |
vfunc[1]: | non-virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream() |
Table 7-110. Secondary vtable for basic_fstream<wchar_t, char_traits<wchar_t> >
Base Offset | -264 |
Virtual Base Offset | -264 |
RTTI | typeinfo for basic_fstream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream() |
vfunc[1]: | virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream() |
The VTT for the std::basic_fstream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-111
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_fstream<wchar_t, std::char_traits<wchar_t> > specified in Table 7-112, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-112. libstdcxx - Class basic_fstream<wchar_t, char_traits<wchar_t> > Function Interfaces
non-virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream()(GLIBCXX_3.4) [1] |
non-virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_fstream<wchar_t, char_traits<wchar_t> >::~basic_fstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_istream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-113
Table 7-113. Primary vtable for basic_istream<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 16 |
RTTI | typeinfo for basic_istream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_istream<wchar_t, char_traits<wchar_t> >::~basic_istream() |
vfunc[1]: | basic_istream<wchar_t, char_traits<wchar_t> >::~basic_istream() |
Table 7-114. Secondary vtable for basic_istream<wchar_t, char_traits<wchar_t> >
Base Offset | -16 |
Virtual Base Offset | -16 |
RTTI | typeinfo for basic_istream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | virtual thunk to basic_istream<wchar_t, char_traits<wchar_t> >::~basic_istream() |
vfunc[1]: | virtual thunk to basic_istream<wchar_t, char_traits<wchar_t> >::~basic_istream() |
The VTT for the std::basic_istream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-115
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_istream<wchar_t, std::char_traits<wchar_t> > specified in Table 7-116, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-116. libstdcxx - Class basic_istream<wchar_t, char_traits<wchar_t> > Function Interfaces
basic_istream<wchar_t, char_traits<wchar_t> >::get(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_istream<wchar_t, char_traits<wchar_t> >::get(wchar_t*, long, wchar_t)(GLIBCXX_3.4) [1] |
basic_istream<wchar_t, char_traits<wchar_t> >::read(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_istream<wchar_t, char_traits<wchar_t> >::seekg(long, _Ios_Seekdir)(GLIBCXX_3.4) [1] |
basic_istream<wchar_t, char_traits<wchar_t> >::ignore(long, unsigned int)(GLIBCXX_3.4) [1] |
basic_istream<wchar_t, char_traits<wchar_t> >::getline(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_istream<wchar_t, char_traits<wchar_t> >::getline(wchar_t*, long, wchar_t)(GLIBCXX_3.4) [1] |
basic_istream<wchar_t, char_traits<wchar_t> >::readsome(wchar_t*, long)(GLIBCXX_3.4) [1] |
virtual thunk to basic_istream<wchar_t, char_traits<wchar_t> >::~basic_istream()(GLIBCXX_3.4) [2] |
virtual thunk to basic_istream<wchar_t, char_traits<wchar_t> >::~basic_istream()(GLIBCXX_3.4) [2] |
Referenced Specification(s)
[2]. Itanium C++ ABI
The virtual table for the std::basic_ostream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-117
Table 7-117. Primary vtable for basic_ostream<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 8 |
RTTI | typeinfo for basic_ostream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_ostream<wchar_t, char_traits<wchar_t> >::~basic_ostream() |
vfunc[1]: | basic_ostream<wchar_t, char_traits<wchar_t> >::~basic_ostream() |
Table 7-118. Secondary vtable for basic_ostream<wchar_t, char_traits<wchar_t> >
Base Offset | -8 |
Virtual Base Offset | -8 |
RTTI | typeinfo for basic_ostream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | virtual thunk to basic_ostream<wchar_t, char_traits<wchar_t> >::~basic_ostream() |
vfunc[1]: | virtual thunk to basic_ostream<wchar_t, char_traits<wchar_t> >::~basic_ostream() |
The VTT for the std::basic_ostream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-119
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_ostream<wchar_t, std::char_traits<wchar_t> > specified in Table 7-120, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-120. libstdcxx - Class basic_ostream<wchar_t, char_traits<wchar_t> > Function Interfaces
basic_ostream<wchar_t, char_traits<wchar_t> >::seekp(long, _Ios_Seekdir)(GLIBCXX_3.4) [1] |
basic_ostream<wchar_t, char_traits<wchar_t> >::write(wchar_t const*, long)(GLIBCXX_3.4) [1] |
virtual thunk to basic_ostream<wchar_t, char_traits<wchar_t> >::~basic_ostream()(GLIBCXX_3.4) [2] |
virtual thunk to basic_ostream<wchar_t, char_traits<wchar_t> >::~basic_ostream()(GLIBCXX_3.4) [2] |
Referenced Specification(s)
[2]. Itanium C++ ABI
The Run Time Type Information for the std::messages_base class is described by Table 7-121
No external methods are defined for libstdcxx - Class std::messages_base
The virtual table for the std::runtime_error class is described by Table 7-122
Table 7-122. Primary vtable for runtime_error
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for runtime_error |
vfunc[0]: | runtime_error::~runtime_error() |
vfunc[1]: | runtime_error::~runtime_error() |
vfunc[2]: | runtime_error::what() const |
The Run Time Type Information for the std::runtime_error class is described by Table 7-123
No external methods are defined for libstdcxx - Class std::runtime_error
The virtual table for the std::basic_ifstream<char, std::char_traits<char> > class is described by Table 7-124
Table 7-124. Primary vtable for basic_ifstream<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 256 |
RTTI | typeinfo for basic_ifstream<char, char_traits<char> > |
vfunc[0]: | basic_ifstream<char, char_traits<char> >::~basic_ifstream() |
vfunc[1]: | basic_ifstream<char, char_traits<char> >::~basic_ifstream() |
Table 7-125. Secondary vtable for basic_ifstream<char, char_traits<char> >
Base Offset | -256 |
Virtual Base Offset | -256 |
RTTI | typeinfo for basic_ifstream<char, char_traits<char> > |
vfunc[0]: | virtual thunk to basic_ifstream<char, char_traits<char> >::~basic_ifstream() |
vfunc[1]: | virtual thunk to basic_ifstream<char, char_traits<char> >::~basic_ifstream() |
The VTT for the std::basic_ifstream<char, std::char_traits<char> > class is described by Table 7-126
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_ifstream<char, std::char_traits<char> > specified in Table 7-127, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-127. libstdcxx - Class basic_ifstream<char, char_traits<char> > Function Interfaces
virtual thunk to basic_ifstream<char, char_traits<char> >::~basic_ifstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_ifstream<char, char_traits<char> >::~basic_ifstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_ifstream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-128
Table 7-128. Primary vtable for basic_ifstream<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 256 |
RTTI | typeinfo for basic_ifstream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_ifstream<wchar_t, char_traits<wchar_t> >::~basic_ifstream() |
vfunc[1]: | basic_ifstream<wchar_t, char_traits<wchar_t> >::~basic_ifstream() |
Table 7-129. Secondary vtable for basic_ifstream<wchar_t, char_traits<wchar_t> >
Base Offset | -256 |
Virtual Base Offset | -256 |
RTTI | typeinfo for basic_ifstream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | virtual thunk to basic_ifstream<wchar_t, char_traits<wchar_t> >::~basic_ifstream() |
vfunc[1]: | virtual thunk to basic_ifstream<wchar_t, char_traits<wchar_t> >::~basic_ifstream() |
The VTT for the std::basic_ifstream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-130
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_ifstream<wchar_t, std::char_traits<wchar_t> > specified in Table 7-131, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-131. libstdcxx - Class basic_ifstream<wchar_t, char_traits<wchar_t> > Function Interfaces
virtual thunk to basic_ifstream<wchar_t, char_traits<wchar_t> >::~basic_ifstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_ifstream<wchar_t, char_traits<wchar_t> >::~basic_ifstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_iostream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-132
Table 7-132. Primary vtable for basic_iostream<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 24 |
RTTI | typeinfo for basic_iostream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream() |
vfunc[1]: | basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream() |
Table 7-133. Secondary vtable for basic_iostream<wchar_t, char_traits<wchar_t> >
Base Offset | -16 |
Virtual Base Offset | 8 |
RTTI | typeinfo for basic_iostream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | non-virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream() |
vfunc[1]: | non-virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream() |
Table 7-134. Secondary vtable for basic_iostream<wchar_t, char_traits<wchar_t> >
Base Offset | -24 |
Virtual Base Offset | -24 |
RTTI | typeinfo for basic_iostream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream() |
vfunc[1]: | virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream() |
The VTT for the std::basic_iostream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-135
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_iostream<wchar_t, std::char_traits<wchar_t> > specified in Table 7-136, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-136. libstdcxx - Class basic_iostream<wchar_t, char_traits<wchar_t> > Function Interfaces
non-virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream()(GLIBCXX_3.4) [1] |
non-virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_iostream<wchar_t, char_traits<wchar_t> >::~basic_iostream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_ofstream<char, std::char_traits<char> > class is described by Table 7-137
Table 7-137. Primary vtable for basic_ofstream<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 248 |
RTTI | typeinfo for basic_ofstream<char, char_traits<char> > |
vfunc[0]: | basic_ofstream<char, char_traits<char> >::~basic_ofstream() |
vfunc[1]: | basic_ofstream<char, char_traits<char> >::~basic_ofstream() |
Table 7-138. Secondary vtable for basic_ofstream<char, char_traits<char> >
Base Offset | -248 |
Virtual Base Offset | -248 |
RTTI | typeinfo for basic_ofstream<char, char_traits<char> > |
vfunc[0]: | virtual thunk to basic_ofstream<char, char_traits<char> >::~basic_ofstream() |
vfunc[1]: | virtual thunk to basic_ofstream<char, char_traits<char> >::~basic_ofstream() |
The VTT for the std::basic_ofstream<char, std::char_traits<char> > class is described by Table 7-139
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_ofstream<char, std::char_traits<char> > specified in Table 7-140, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-140. libstdcxx - Class basic_ofstream<char, char_traits<char> > Function Interfaces
virtual thunk to basic_ofstream<char, char_traits<char> >::~basic_ofstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_ofstream<char, char_traits<char> >::~basic_ofstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_ofstream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-141
Table 7-141. Primary vtable for basic_ofstream<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 248 |
RTTI | typeinfo for basic_ofstream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_ofstream<wchar_t, char_traits<wchar_t> >::~basic_ofstream() |
vfunc[1]: | basic_ofstream<wchar_t, char_traits<wchar_t> >::~basic_ofstream() |
Table 7-142. Secondary vtable for basic_ofstream<wchar_t, char_traits<wchar_t> >
Base Offset | -248 |
Virtual Base Offset | -248 |
RTTI | typeinfo for basic_ofstream<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | virtual thunk to basic_ofstream<wchar_t, char_traits<wchar_t> >::~basic_ofstream() |
vfunc[1]: | virtual thunk to basic_ofstream<wchar_t, char_traits<wchar_t> >::~basic_ofstream() |
The VTT for the std::basic_ofstream<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-143
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_ofstream<wchar_t, std::char_traits<wchar_t> > specified in Table 7-144, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-144. libstdcxx - Class basic_ofstream<wchar_t, char_traits<wchar_t> > Function Interfaces
virtual thunk to basic_ofstream<wchar_t, char_traits<wchar_t> >::~basic_ofstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_ofstream<wchar_t, char_traits<wchar_t> >::~basic_ofstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::codecvt_byname<char, char, __mbstate_t> class is described by Table 7-145
Table 7-145. Primary vtable for codecvt_byname<char, char, __mbstate_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for codecvt_byname<char, char, __mbstate_t> |
vfunc[0]: | codecvt_byname<char, char, __mbstate_t>::~codecvt_byname() |
vfunc[1]: | codecvt_byname<char, char, __mbstate_t>::~codecvt_byname() |
vfunc[2]: | codecvt<char, char, __mbstate_t>::do_out(__mbstate_t&, char const*, char const*, char const*&, char*, char*, char*&) const |
vfunc[3]: | codecvt<char, char, __mbstate_t>::do_unshift(__mbstate_t&, char*, char*, char*&) const |
vfunc[4]: | codecvt<char, char, __mbstate_t>::do_in(__mbstate_t&, char const*, char const*, char const*&, char*, char*, char*&) const |
vfunc[5]: | codecvt<char, char, __mbstate_t>::do_encoding() const |
vfunc[6]: | codecvt<char, char, __mbstate_t>::do_always_noconv() const |
vfunc[7]: | codecvt<char, char, __mbstate_t>::do_length(__mbstate_t&, char const*, char const*, unsigned long) const |
vfunc[8]: | codecvt<char, char, __mbstate_t>::do_max_length() const |
The Run Time Type Information for the std::codecvt_byname<char, char, __mbstate_t> class is described by Table 7-146
An LSB conforming implementation shall provide the architecture specific methods for Class std::codecvt_byname<char, char, __mbstate_t> specified in Table 7-147, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-147. libstdcxx - Class codecvt_byname<char, char, __mbstate_t> Function Interfaces
codecvt_byname<char, char, __mbstate_t>::codecvt_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
codecvt_byname<char, char, __mbstate_t>::codecvt_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::codecvt_byname<wchar_t, char, __mbstate_t> class is described by Table 7-148
Table 7-148. Primary vtable for codecvt_byname<wchar_t, char, __mbstate_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for codecvt_byname<wchar_t, char, __mbstate_t> |
vfunc[0]: | codecvt_byname<wchar_t, char, __mbstate_t>::~codecvt_byname() |
vfunc[1]: | codecvt_byname<wchar_t, char, __mbstate_t>::~codecvt_byname() |
vfunc[2]: | codecvt<wchar_t, char, __mbstate_t>::do_out(__mbstate_t&, wchar_t const*, wchar_t const*, wchar_t const*&, char*, char*, char*&) const |
vfunc[3]: | codecvt<wchar_t, char, __mbstate_t>::do_unshift(__mbstate_t&, char*, char*, char*&) const |
vfunc[4]: | codecvt<wchar_t, char, __mbstate_t>::do_in(__mbstate_t&, char const*, char const*, char const*&, wchar_t*, wchar_t*, wchar_t*&) const |
vfunc[5]: | codecvt<wchar_t, char, __mbstate_t>::do_encoding() const |
vfunc[6]: | codecvt<wchar_t, char, __mbstate_t>::do_always_noconv() const |
vfunc[7]: | codecvt<wchar_t, char, __mbstate_t>::do_length(__mbstate_t&, char const*, char const*, unsigned long) const |
vfunc[8]: | codecvt<wchar_t, char, __mbstate_t>::do_max_length() const |
The Run Time Type Information for the std::codecvt_byname<wchar_t, char, __mbstate_t> class is described by Table 7-149
The virtual table for the std::collate_byname<wchar_t> class is described by Table 7-150
Table 7-150. Primary vtable for collate_byname<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for collate_byname<wchar_t> |
vfunc[0]: | collate_byname<wchar_t>::~collate_byname() |
vfunc[1]: | collate_byname<wchar_t>::~collate_byname() |
vfunc[2]: | collate<wchar_t>::do_compare(wchar_t const*, wchar_t const*, wchar_t const*, wchar_t const*) const |
vfunc[3]: | collate<wchar_t>::do_transform(wchar_t const*, wchar_t const*) const |
vfunc[4]: | collate<wchar_t>::do_hash(wchar_t const*, wchar_t const*) const |
The Run Time Type Information for the std::collate_byname<wchar_t> class is described by Table 7-151
An LSB conforming implementation shall provide the architecture specific methods for Class std::codecvt_byname<wchar_t, char, __mbstate_t> specified in Table 7-152, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-152. libstdcxx - Class codecvt_byname<wchar_t, char, __mbstate_t> Function Interfaces
codecvt_byname<wchar_t, char, __mbstate_t>::codecvt_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
codecvt_byname<wchar_t, char, __mbstate_t>::codecvt_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
collate_byname<wchar_t>::collate_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
collate_byname<wchar_t>::collate_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::collate_byname<char> class is described by Table 7-153
Table 7-153. Primary vtable for collate_byname<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for collate_byname<char> |
vfunc[0]: | collate_byname<char>::~collate_byname() |
vfunc[1]: | collate_byname<char>::~collate_byname() |
vfunc[2]: | collate<char>::do_compare(char const*, char const*, char const*, char const*) const |
vfunc[3]: | collate<char>::do_transform(char const*, char const*) const |
vfunc[4]: | collate<char>::do_hash(char const*, char const*) const |
The Run Time Type Information for the std::collate_byname<char> class is described by Table 7-154
An LSB conforming implementation shall provide the architecture specific methods for Class std::collate_byname<char> specified in Table 7-155, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-155. libstdcxx - Class collate_byname<char> Function Interfaces
collate_byname<char>::collate_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
collate_byname<char>::collate_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
No external methods are defined for libstdcxx - Class std::collate_byname<wchar_t>
The virtual table for the std::overflow_error class is described by Table 7-156
Table 7-156. Primary vtable for overflow_error
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for overflow_error |
vfunc[0]: | overflow_error::~overflow_error() |
vfunc[1]: | overflow_error::~overflow_error() |
vfunc[2]: | runtime_error::what() const |
The Run Time Type Information for the std::overflow_error class is described by Table 7-157
No external methods are defined for libstdcxx - Class std::overflow_error
The virtual table for the std::basic_streambuf<char, std::char_traits<char> > class is described by Table 7-158
Table 7-158. Primary vtable for basic_streambuf<char, char_traits<char> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for basic_streambuf<char, char_traits<char> > |
vfunc[0]: | basic_streambuf<char, char_traits<char> >::~basic_streambuf() |
vfunc[1]: | basic_streambuf<char, char_traits<char> >::~basic_streambuf() |
vfunc[2]: | basic_streambuf<char, char_traits<char> >::imbue(locale const&) |
vfunc[3]: | basic_streambuf<char, char_traits<char> >::setbuf(char*, long) |
vfunc[4]: | basic_streambuf<char, char_traits<char> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | basic_streambuf<char, char_traits<char> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_streambuf<char, char_traits<char> >::sync() |
vfunc[7]: | basic_streambuf<char, char_traits<char> >::showmanyc() |
vfunc[8]: | basic_streambuf<char, char_traits<char> >::xsgetn(char*, long) |
vfunc[9]: | basic_streambuf<char, char_traits<char> >::underflow() |
vfunc[10]: | basic_streambuf<char, char_traits<char> >::uflow() |
vfunc[11]: | basic_streambuf<char, char_traits<char> >::pbackfail(int) |
vfunc[12]: | basic_streambuf<char, char_traits<char> >::xsputn(char const*, long) |
vfunc[13]: | basic_streambuf<char, char_traits<char> >::overflow(int) |
The Run Time Type Information for the std::basic_streambuf<char, std::char_traits<char> > class is described by Table 7-159
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_streambuf<char, std::char_traits<char> > specified in Table 7-160, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-160. libstdcxx - Class basic_streambuf<char, char_traits<char> > Function Interfaces
basic_streambuf<char, char_traits<char> >::pubseekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
basic_streambuf<char, char_traits<char> >::sgetn(char*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<char, char_traits<char> >::sputn(char const*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<char, char_traits<char> >::setbuf(char*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<char, char_traits<char> >::xsgetn(char*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<char, char_traits<char> >::xsputn(char const*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<char, char_traits<char> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
basic_streambuf<char, char_traits<char> >::pubsetbuf(char*, long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::basic_streambuf<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-161
Table 7-161. Primary vtable for basic_streambuf<wchar_t, char_traits<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for basic_streambuf<wchar_t, char_traits<wchar_t> > |
vfunc[0]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::~basic_streambuf() |
vfunc[1]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::~basic_streambuf() |
vfunc[2]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::imbue(locale const&) |
vfunc[3]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::setbuf(wchar_t*, long) |
vfunc[4]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::sync() |
vfunc[7]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::showmanyc() |
vfunc[8]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::xsgetn(wchar_t*, long) |
vfunc[9]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::underflow() |
vfunc[10]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::uflow() |
vfunc[11]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::pbackfail(unsigned int) |
vfunc[12]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::xsputn(wchar_t const*, long) |
vfunc[13]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::overflow(unsigned int) |
The Run Time Type Information for the std::basic_streambuf<wchar_t, std::char_traits<wchar_t> > class is described by Table 7-162
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_streambuf<wchar_t, std::char_traits<wchar_t> > specified in Table 7-163, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-163. libstdcxx - Class basic_streambuf<wchar_t, char_traits<wchar_t> > Function Interfaces
basic_streambuf<wchar_t, char_traits<wchar_t> >::pubseekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
basic_streambuf<wchar_t, char_traits<wchar_t> >::sgetn(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<wchar_t, char_traits<wchar_t> >::sputn(wchar_t const*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<wchar_t, char_traits<wchar_t> >::setbuf(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<wchar_t, char_traits<wchar_t> >::xsgetn(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<wchar_t, char_traits<wchar_t> >::xsputn(wchar_t const*, long)(GLIBCXX_3.4) [1] |
basic_streambuf<wchar_t, char_traits<wchar_t> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
basic_streambuf<wchar_t, char_traits<wchar_t> >::pubsetbuf(wchar_t*, long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::basic_stringbuf<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-164
Table 7-164. Primary vtable for basic_stringbuf<char, char_traits<char>, allocator<char> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for basic_stringbuf<char, char_traits<char>, allocator<char> > |
vfunc[0]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::~basic_stringbuf() |
vfunc[1]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::~basic_stringbuf() |
vfunc[2]: | basic_streambuf<char, char_traits<char> >::imbue(locale const&) |
vfunc[3]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::setbuf(char*, long) |
vfunc[4]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_streambuf<char, char_traits<char> >::sync() |
vfunc[7]: | basic_streambuf<char, char_traits<char> >::showmanyc() |
vfunc[8]: | basic_streambuf<char, char_traits<char> >::xsgetn(char*, long) |
vfunc[9]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::underflow() |
vfunc[10]: | basic_streambuf<char, char_traits<char> >::uflow() |
vfunc[11]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::pbackfail(int) |
vfunc[12]: | basic_streambuf<char, char_traits<char> >::xsputn(char const*, long) |
vfunc[13]: | basic_stringbuf<char, char_traits<char>, allocator<char> >::overflow(int) |
The Run Time Type Information for the std::basic_stringbuf<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-165
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_stringbuf<char, std::char_traits<char>, std::allocator<char> > specified in Table 7-166, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-166. libstdcxx - Class basic_stringbuf<char, char_traits<char>, allocator<char> > Function Interfaces
basic_stringbuf<char, char_traits<char>, allocator<char> >::setbuf(char*, long)(GLIBCXX_3.4) [1] |
basic_stringbuf<char, char_traits<char>, allocator<char> >::_M_sync(char*, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_stringbuf<char, char_traits<char>, allocator<char> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::basic_stringbuf<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-167
Table 7-167. Primary vtable for basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringbuf() |
vfunc[1]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringbuf() |
vfunc[2]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::imbue(locale const&) |
vfunc[3]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::setbuf(wchar_t*, long) |
vfunc[4]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode) |
vfunc[5]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::seekpos(fpos<__mbstate_t>, _Ios_Openmode) |
vfunc[6]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::sync() |
vfunc[7]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::showmanyc() |
vfunc[8]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::xsgetn(wchar_t*, long) |
vfunc[9]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::underflow() |
vfunc[10]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::uflow() |
vfunc[11]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::pbackfail(unsigned int) |
vfunc[12]: | basic_streambuf<wchar_t, char_traits<wchar_t> >::xsputn(wchar_t const*, long) |
vfunc[13]: | basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::overflow(unsigned int) |
The Run Time Type Information for the std::basic_stringbuf<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-168
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_stringbuf<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > specified in Table 7-169, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-169. libstdcxx - Class basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > Function Interfaces
basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::setbuf(wchar_t*, long)(GLIBCXX_3.4) [1] |
basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::_M_sync(wchar_t*, unsigned long, unsigned long)(GLIBCXX_3.4) [1] |
basic_stringbuf<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::seekoff(long, _Ios_Seekdir, _Ios_Openmode)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::messages_byname<char> class is described by Table 7-170
Table 7-170. Primary vtable for messages_byname<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for messages_byname<char> |
vfunc[0]: | messages_byname<char>::~messages_byname() |
vfunc[1]: | messages_byname<char>::~messages_byname() |
vfunc[2]: | messages<char>::do_open(basic_string<char, char_traits<char>, allocator<char> > const&, locale const&) const |
vfunc[3]: | messages<char>::do_get(int, int, int, basic_string<char, char_traits<char>, allocator<char> > const&) const |
vfunc[4]: | messages<char>::do_close(int) const |
The Run Time Type Information for the std::messages_byname<char> class is described by Table 7-171
An LSB conforming implementation shall provide the architecture specific methods for Class std::messages_byname<char> specified in Table 7-172, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-172. libstdcxx - Class messages_byname<char> Function Interfaces
messages_byname<char>::messages_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
messages_byname<char>::messages_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::messages_byname<wchar_t> class is described by Table 7-173
Table 7-173. Primary vtable for messages_byname<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for messages_byname<wchar_t> |
vfunc[0]: | messages_byname<wchar_t>::~messages_byname() |
vfunc[1]: | messages_byname<wchar_t>::~messages_byname() |
vfunc[2]: | messages<wchar_t>::do_open(basic_string<char, char_traits<char>, allocator<char> > const&, locale const&) const |
vfunc[3]: | messages<wchar_t>::do_get(int, int, int, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&) const |
vfunc[4]: | messages<wchar_t>::do_close(int) const |
The Run Time Type Information for the std::messages_byname<wchar_t> class is described by Table 7-174
An LSB conforming implementation shall provide the architecture specific methods for Class std::messages_byname<wchar_t> specified in Table 7-175, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-175. libstdcxx - Class messages_byname<wchar_t> Function Interfaces
messages_byname<wchar_t>::messages_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
messages_byname<wchar_t>::messages_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::numpunct_byname<char> class is described by Table 7-176
Table 7-176. Primary vtable for numpunct_byname<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for numpunct_byname<char> |
vfunc[0]: | numpunct_byname<char>::~numpunct_byname() |
vfunc[1]: | numpunct_byname<char>::~numpunct_byname() |
vfunc[2]: | numpunct<char>::do_decimal_point() const |
vfunc[3]: | numpunct<char>::do_thousands_sep() const |
vfunc[4]: | numpunct<char>::do_grouping() const |
vfunc[5]: | numpunct<char>::do_truename() const |
vfunc[6]: | numpunct<char>::do_falsename() const |
The Run Time Type Information for the std::numpunct_byname<char> class is described by Table 7-177
An LSB conforming implementation shall provide the architecture specific methods for Class std::numpunct_byname<char> specified in Table 7-178, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-178. libstdcxx - Class numpunct_byname<char> Function Interfaces
numpunct_byname<char>::numpunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
numpunct_byname<char>::numpunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::numpunct_byname<wchar_t> class is described by Table 7-179
Table 7-179. Primary vtable for numpunct_byname<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for numpunct_byname<wchar_t> |
vfunc[0]: | numpunct_byname<wchar_t>::~numpunct_byname() |
vfunc[1]: | numpunct_byname<wchar_t>::~numpunct_byname() |
vfunc[2]: | numpunct<wchar_t>::do_decimal_point() const |
vfunc[3]: | numpunct<wchar_t>::do_thousands_sep() const |
vfunc[4]: | numpunct<wchar_t>::do_grouping() const |
vfunc[5]: | numpunct<wchar_t>::do_truename() const |
vfunc[6]: | numpunct<wchar_t>::do_falsename() const |
The Run Time Type Information for the std::numpunct_byname<wchar_t> class is described by Table 7-180
An LSB conforming implementation shall provide the architecture specific methods for Class std::numpunct_byname<wchar_t> specified in Table 7-181, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-181. libstdcxx - Class numpunct_byname<wchar_t> Function Interfaces
numpunct_byname<wchar_t>::numpunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
numpunct_byname<wchar_t>::numpunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::time_get_byname<char, std::istreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-182
Table 7-182. Primary vtable for time_get_byname<char, istreambuf_iterator<char, char_traits<char> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for time_get_byname<char, istreambuf_iterator<char, char_traits<char> > > |
vfunc[0]: | time_get_byname<char, istreambuf_iterator<char, char_traits<char> > >::~time_get_byname() |
vfunc[1]: | time_get_byname<char, istreambuf_iterator<char, char_traits<char> > >::~time_get_byname() |
vfunc[2]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_date_order() const |
vfunc[3]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_time(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[4]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_date(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[5]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_weekday(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[6]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_monthname(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[7]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_year(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
The Run Time Type Information for the std::time_get_byname<char, std::istreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-183
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_get_byname<char, std::istreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-184, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-184. libstdcxx - Class time_get_byname<char, istreambuf_iterator<char, char_traits<char> > > Function Interfaces
time_get_byname<char, istreambuf_iterator<char, char_traits<char> > >::time_get_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
time_get_byname<char, istreambuf_iterator<char, char_traits<char> > >::time_get_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::time_get_byname<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-185
Table 7-185. Primary vtable for time_get_byname<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for time_get_byname<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > > |
vfunc[0]: | time_get_byname<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~time_get_byname() |
vfunc[1]: | time_get_byname<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~time_get_byname() |
vfunc[2]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_date_order() const |
vfunc[3]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_time(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[4]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_date(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[5]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_weekday(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[6]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_monthname(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[7]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_year(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
The Run Time Type Information for the std::time_get_byname<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-186
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_get_byname<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-187, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-187. libstdcxx - Class time_get_byname<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
time_get_byname<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_get_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
time_get_byname<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_get_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::time_put_byname<char, std::ostreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-188
Table 7-188. Primary vtable for time_put_byname<char, ostreambuf_iterator<char, char_traits<char> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for time_put_byname<char, ostreambuf_iterator<char, char_traits<char> > > |
vfunc[0]: | time_put_byname<char, ostreambuf_iterator<char, char_traits<char> > >::~time_put_byname() |
vfunc[1]: | time_put_byname<char, ostreambuf_iterator<char, char_traits<char> > >::~time_put_byname() |
vfunc[2]: | time_put<char, ostreambuf_iterator<char, char_traits<char> > >::do_put(ostreambuf_iterator<char, char_traits<char> >, ios_base&, char, tm const*, char, char) const |
The Run Time Type Information for the std::time_put_byname<char, std::ostreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-189
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_put_byname<char, std::ostreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-190, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-190. libstdcxx - Class time_put_byname<char, ostreambuf_iterator<char, char_traits<char> > > Function Interfaces
time_put_byname<char, ostreambuf_iterator<char, char_traits<char> > >::time_put_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
time_put_byname<char, ostreambuf_iterator<char, char_traits<char> > >::time_put_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::time_put_byname<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-191
Table 7-191. Primary vtable for time_put_byname<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for time_put_byname<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > > |
vfunc[0]: | time_put_byname<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~time_put_byname() |
vfunc[1]: | time_put_byname<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~time_put_byname() |
vfunc[2]: | time_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_put(ostreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, wchar_t, tm const*, char, char) const |
The Run Time Type Information for the std::time_put_byname<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-192
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_put_byname<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-193, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-193. libstdcxx - Class time_put_byname<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
time_put_byname<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_put_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
time_put_byname<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_put_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::underflow_error class is described by Table 7-194
Table 7-194. Primary vtable for underflow_error
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for underflow_error |
vfunc[0]: | underflow_error::~underflow_error() |
vfunc[1]: | underflow_error::~underflow_error() |
vfunc[2]: | runtime_error::what() const |
The Run Time Type Information for the std::underflow_error class is described by Table 7-195
No external methods are defined for libstdcxx - Class std::underflow_error
The virtual table for the std::invalid_argument class is described by Table 7-196
Table 7-196. Primary vtable for invalid_argument
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for invalid_argument |
vfunc[0]: | invalid_argument::~invalid_argument() |
vfunc[1]: | invalid_argument::~invalid_argument() |
vfunc[2]: | logic_error::what() const |
The Run Time Type Information for the std::invalid_argument class is described by Table 7-197
No external methods are defined for libstdcxx - Class std::invalid_argument
The virtual table for the std::moneypunct_byname<char, false> class is described by Table 7-198
Table 7-198. Primary vtable for moneypunct_byname<char, false>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct_byname<char, false> |
vfunc[0]: | moneypunct_byname<char, false>::~moneypunct_byname() |
vfunc[1]: | moneypunct_byname<char, false>::~moneypunct_byname() |
vfunc[2]: | moneypunct<char, false>::do_decimal_point() const |
vfunc[3]: | moneypunct<char, false>::do_thousands_sep() const |
vfunc[4]: | moneypunct<char, false>::do_grouping() const |
vfunc[5]: | moneypunct<char, false>::do_curr_symbol() const |
vfunc[6]: | moneypunct<char, false>::do_positive_sign() const |
vfunc[7]: | moneypunct<char, false>::do_negative_sign() const |
vfunc[8]: | moneypunct<char, false>::do_frac_digits() const |
vfunc[9]: | moneypunct<char, false>::do_pos_format() const |
vfunc[10]: | moneypunct<char, false>::do_neg_format() const |
The Run Time Type Information for the std::moneypunct_byname<char, false> class is described by Table 7-199
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct_byname<char, false> specified in Table 7-200, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-200. libstdcxx - Class moneypunct_byname<char, false> Function Interfaces
moneypunct_byname<char, false>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct_byname<char, false>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::moneypunct_byname<char, true> class is described by Table 7-201
Table 7-201. Primary vtable for moneypunct_byname<char, true>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct_byname<char, true> |
vfunc[0]: | moneypunct_byname<char, true>::~moneypunct_byname() |
vfunc[1]: | moneypunct_byname<char, true>::~moneypunct_byname() |
vfunc[2]: | moneypunct<char, true>::do_decimal_point() const |
vfunc[3]: | moneypunct<char, true>::do_thousands_sep() const |
vfunc[4]: | moneypunct<char, true>::do_grouping() const |
vfunc[5]: | moneypunct<char, true>::do_curr_symbol() const |
vfunc[6]: | moneypunct<char, true>::do_positive_sign() const |
vfunc[7]: | moneypunct<char, true>::do_negative_sign() const |
vfunc[8]: | moneypunct<char, true>::do_frac_digits() const |
vfunc[9]: | moneypunct<char, true>::do_pos_format() const |
vfunc[10]: | moneypunct<char, true>::do_neg_format() const |
The Run Time Type Information for the std::moneypunct_byname<char, true> class is described by Table 7-202
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct_byname<char, true> specified in Table 7-203, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-203. libstdcxx - Class moneypunct_byname<char, true> Function Interfaces
moneypunct_byname<char, true>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct_byname<char, true>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::moneypunct_byname<wchar_t, false> class is described by Table 7-204
Table 7-204. Primary vtable for moneypunct_byname<wchar_t, false>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct_byname<wchar_t, false> |
vfunc[0]: | moneypunct_byname<wchar_t, false>::~moneypunct_byname() |
vfunc[1]: | moneypunct_byname<wchar_t, false>::~moneypunct_byname() |
vfunc[2]: | moneypunct<wchar_t, false>::do_decimal_point() const |
vfunc[3]: | moneypunct<wchar_t, false>::do_thousands_sep() const |
vfunc[4]: | moneypunct<wchar_t, false>::do_grouping() const |
vfunc[5]: | moneypunct<wchar_t, false>::do_curr_symbol() const |
vfunc[6]: | moneypunct<wchar_t, false>::do_positive_sign() const |
vfunc[7]: | moneypunct<wchar_t, false>::do_negative_sign() const |
vfunc[8]: | moneypunct<wchar_t, false>::do_frac_digits() const |
vfunc[9]: | moneypunct<wchar_t, false>::do_pos_format() const |
vfunc[10]: | moneypunct<wchar_t, false>::do_neg_format() const |
The Run Time Type Information for the std::moneypunct_byname<wchar_t, false> class is described by Table 7-205
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct_byname<wchar_t, false> specified in Table 7-206, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-206. libstdcxx - Class moneypunct_byname<wchar_t, false> Function Interfaces
moneypunct_byname<wchar_t, false>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct_byname<wchar_t, false>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::moneypunct_byname<wchar_t, true> class is described by Table 7-207
Table 7-207. Primary vtable for moneypunct_byname<wchar_t, true>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for moneypunct_byname<wchar_t, true> |
vfunc[0]: | moneypunct_byname<wchar_t, true>::~moneypunct_byname() |
vfunc[1]: | moneypunct_byname<wchar_t, true>::~moneypunct_byname() |
vfunc[2]: | moneypunct<wchar_t, true>::do_decimal_point() const |
vfunc[3]: | moneypunct<wchar_t, true>::do_thousands_sep() const |
vfunc[4]: | moneypunct<wchar_t, true>::do_grouping() const |
vfunc[5]: | moneypunct<wchar_t, true>::do_curr_symbol() const |
vfunc[6]: | moneypunct<wchar_t, true>::do_positive_sign() const |
vfunc[7]: | moneypunct<wchar_t, true>::do_negative_sign() const |
vfunc[8]: | moneypunct<wchar_t, true>::do_frac_digits() const |
vfunc[9]: | moneypunct<wchar_t, true>::do_pos_format() const |
vfunc[10]: | moneypunct<wchar_t, true>::do_neg_format() const |
The Run Time Type Information for the std::moneypunct_byname<wchar_t, true> class is described by Table 7-208
An LSB conforming implementation shall provide the architecture specific methods for Class std::moneypunct_byname<wchar_t, true> specified in Table 7-209, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-209. libstdcxx - Class moneypunct_byname<wchar_t, true> Function Interfaces
moneypunct_byname<wchar_t, true>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
moneypunct_byname<wchar_t, true>::moneypunct_byname(char const*, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::basic_stringstream<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-210
Table 7-210. Primary vtable for basic_stringstream<char, char_traits<char>, allocator<char> >
Base Offset | 0 |
Virtual Base Offset | 104 |
RTTI | typeinfo for basic_stringstream<char, char_traits<char>, allocator<char> > |
vfunc[0]: | basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream() |
vfunc[1]: | basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream() |
Table 7-211. Secondary vtable for basic_stringstream<char, char_traits<char>, allocator<char> >
Base Offset | -16 |
Virtual Base Offset | 88 |
RTTI | typeinfo for basic_stringstream<char, char_traits<char>, allocator<char> > |
vfunc[0]: | non-virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream() |
vfunc[1]: | non-virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream() |
Table 7-212. Secondary vtable for basic_stringstream<char, char_traits<char>, allocator<char> >
Base Offset | -104 |
Virtual Base Offset | -104 |
RTTI | typeinfo for basic_stringstream<char, char_traits<char>, allocator<char> > |
vfunc[0]: | virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream() |
vfunc[1]: | virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream() |
The VTT for the std::basic_stringstream<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-213
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_stringstream<char, std::char_traits<char>, std::allocator<char> > specified in Table 7-214, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-214. libstdcxx - Class basic_stringstream<char, char_traits<char>, allocator<char> > Function Interfaces
non-virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
non-virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_stringstream<char, char_traits<char>, allocator<char> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_stringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-215
Table 7-215. Primary vtable for basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 104 |
RTTI | typeinfo for basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream() |
vfunc[1]: | basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream() |
Table 7-216. Secondary vtable for basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | -16 |
Virtual Base Offset | 88 |
RTTI | typeinfo for basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | non-virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream() |
vfunc[1]: | non-virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream() |
Table 7-217. Secondary vtable for basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | -104 |
Virtual Base Offset | -104 |
RTTI | typeinfo for basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream() |
vfunc[1]: | virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream() |
The VTT for the std::basic_stringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-218
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_stringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > specified in Table 7-219, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-219. libstdcxx - Class basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > Function Interfaces
non-virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
non-virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_stringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_stringstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_istringstream<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-220
Table 7-220. Primary vtable for basic_istringstream<char, char_traits<char>, allocator<char> >
Base Offset | 0 |
Virtual Base Offset | 96 |
RTTI | typeinfo for basic_istringstream<char, char_traits<char>, allocator<char> > |
vfunc[0]: | basic_istringstream<char, char_traits<char>, allocator<char> >::~basic_istringstream() |
vfunc[1]: | basic_istringstream<char, char_traits<char>, allocator<char> >::~basic_istringstream() |
Table 7-221. Secondary vtable for basic_istringstream<char, char_traits<char>, allocator<char> >
Base Offset | -96 |
Virtual Base Offset | -96 |
RTTI | typeinfo for basic_istringstream<char, char_traits<char>, allocator<char> > |
vfunc[0]: | virtual thunk to basic_istringstream<char, char_traits<char>, allocator<char> >::~basic_istringstream() |
vfunc[1]: | virtual thunk to basic_istringstream<char, char_traits<char>, allocator<char> >::~basic_istringstream() |
The VTT for the std::basic_istringstream<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-222
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_istringstream<char, std::char_traits<char>, std::allocator<char> > specified in Table 7-223, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-223. libstdcxx - Class basic_istringstream<char, char_traits<char>, allocator<char> > Function Interfaces
virtual thunk to basic_istringstream<char, char_traits<char>, allocator<char> >::~basic_istringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_istringstream<char, char_traits<char>, allocator<char> >::~basic_istringstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_istringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-224
Table 7-224. Primary vtable for basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 96 |
RTTI | typeinfo for basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_istringstream() |
vfunc[1]: | basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_istringstream() |
Table 7-225. Secondary vtable for basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | -96 |
Virtual Base Offset | -96 |
RTTI | typeinfo for basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | virtual thunk to basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_istringstream() |
vfunc[1]: | virtual thunk to basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_istringstream() |
The VTT for the std::basic_istringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-226
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_istringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > specified in Table 7-227, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-227. libstdcxx - Class basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > Function Interfaces
virtual thunk to basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_istringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_istringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_istringstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_ostringstream<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-228
Table 7-228. Primary vtable for basic_ostringstream<char, char_traits<char>, allocator<char> >
Base Offset | 0 |
Virtual Base Offset | 88 |
RTTI | typeinfo for basic_ostringstream<char, char_traits<char>, allocator<char> > |
vfunc[0]: | basic_ostringstream<char, char_traits<char>, allocator<char> >::~basic_ostringstream() |
vfunc[1]: | basic_ostringstream<char, char_traits<char>, allocator<char> >::~basic_ostringstream() |
Table 7-229. Secondary vtable for basic_ostringstream<char, char_traits<char>, allocator<char> >
Base Offset | -88 |
Virtual Base Offset | -88 |
RTTI | typeinfo for basic_ostringstream<char, char_traits<char>, allocator<char> > |
vfunc[0]: | virtual thunk to basic_ostringstream<char, char_traits<char>, allocator<char> >::~basic_ostringstream() |
vfunc[1]: | virtual thunk to basic_ostringstream<char, char_traits<char>, allocator<char> >::~basic_ostringstream() |
The VTT for the std::basic_ostringstream<char, std::char_traits<char>, std::allocator<char> > class is described by Table 7-230
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_ostringstream<char, std::char_traits<char>, std::allocator<char> > specified in Table 7-231, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-231. libstdcxx - Class basic_ostringstream<char, char_traits<char>, allocator<char> > Function Interfaces
virtual thunk to basic_ostringstream<char, char_traits<char>, allocator<char> >::~basic_ostringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_ostringstream<char, char_traits<char>, allocator<char> >::~basic_ostringstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::basic_ostringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-232
Table 7-232. Primary vtable for basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | 0 |
Virtual Base Offset | 88 |
RTTI | typeinfo for basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_ostringstream() |
vfunc[1]: | basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_ostringstream() |
Table 7-233. Secondary vtable for basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >
Base Offset | -88 |
Virtual Base Offset | -88 |
RTTI | typeinfo for basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > |
vfunc[0]: | virtual thunk to basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_ostringstream() |
vfunc[1]: | virtual thunk to basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_ostringstream() |
The VTT for the std::basic_ostringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > class is described by Table 7-234
An LSB conforming implementation shall provide the architecture specific methods for Class std::basic_ostringstream<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> > specified in Table 7-235, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-235. libstdcxx - Class basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > Function Interfaces
virtual thunk to basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_ostringstream()(GLIBCXX_3.4) [1] |
virtual thunk to basic_ostringstream<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >::~basic_ostringstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::__ctype_abstract_base<char> class is described by Table 7-236
Table 7-236. Primary vtable for __ctype_abstract_base<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __ctype_abstract_base<char> |
vfunc[0]: | |
vfunc[1]: | |
vfunc[2]: | __cxa_pure_virtual |
vfunc[3]: | __cxa_pure_virtual |
vfunc[4]: | __cxa_pure_virtual |
vfunc[5]: | __cxa_pure_virtual |
vfunc[6]: | __cxa_pure_virtual |
vfunc[7]: | __cxa_pure_virtual |
vfunc[8]: | __cxa_pure_virtual |
vfunc[9]: | __cxa_pure_virtual |
vfunc[10]: | __cxa_pure_virtual |
vfunc[11]: | __cxa_pure_virtual |
vfunc[12]: | __cxa_pure_virtual |
vfunc[13]: | __cxa_pure_virtual |
No external methods are defined for libstdcxx - Class std::__ctype_abstract_base<char>
The virtual table for the std::__ctype_abstract_base<wchar_t> class is described by Table 7-237
Table 7-237. Primary vtable for __ctype_abstract_base<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __ctype_abstract_base<wchar_t> |
vfunc[0]: | |
vfunc[1]: | |
vfunc[2]: | __cxa_pure_virtual |
vfunc[3]: | __cxa_pure_virtual |
vfunc[4]: | __cxa_pure_virtual |
vfunc[5]: | __cxa_pure_virtual |
vfunc[6]: | __cxa_pure_virtual |
vfunc[7]: | __cxa_pure_virtual |
vfunc[8]: | __cxa_pure_virtual |
vfunc[9]: | __cxa_pure_virtual |
vfunc[10]: | __cxa_pure_virtual |
vfunc[11]: | __cxa_pure_virtual |
vfunc[12]: | __cxa_pure_virtual |
vfunc[13]: | __cxa_pure_virtual |
No external methods are defined for libstdcxx - Class std::__ctype_abstract_base<wchar_t>
No external methods are defined for libstdcxx - Class std::__codecvt_abstract_base<char, char, __mbstate_t>
The virtual table for the std::__codecvt_abstract_base<wchar_t, char, __mbstate_t> class is described by Table 7-238
Table 7-238. Primary vtable for __codecvt_abstract_base<wchar_t, char, __mbstate_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __codecvt_abstract_base<wchar_t, char, __mbstate_t> |
vfunc[0]: | |
vfunc[1]: | |
vfunc[2]: | __cxa_pure_virtual |
vfunc[3]: | __cxa_pure_virtual |
vfunc[4]: | __cxa_pure_virtual |
vfunc[5]: | __cxa_pure_virtual |
vfunc[6]: | __cxa_pure_virtual |
vfunc[7]: | __cxa_pure_virtual |
vfunc[8]: | __cxa_pure_virtual |
No external methods are defined for libstdcxx - Class std::__codecvt_abstract_base<wchar_t, char, __mbstate_t>
The virtual table for the std::ctype<char> class is described by Table 7-239
Table 7-239. Primary vtable for ctype<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for ctype<char> |
vfunc[0]: | ctype<char>::~ctype() |
vfunc[1]: | ctype<char>::~ctype() |
vfunc[2]: | ctype<char>::do_toupper(char) const |
vfunc[3]: | ctype<char>::do_toupper(char*, char const*) const |
vfunc[4]: | ctype<char>::do_tolower(char) const |
vfunc[5]: | ctype<char>::do_tolower(char*, char const*) const |
vfunc[6]: | ctype<char>::do_widen(char) const |
vfunc[7]: | ctype<char>::do_widen(char const*, char const*, char*) const |
vfunc[8]: | ctype<char>::do_narrow(char, char) const |
vfunc[9]: | ctype<char>::do_narrow(char const*, char const*, char, char*) const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::ctype<char> specified in Table 7-240, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-240. libstdcxx - Class ctype<char> Function Interfaces
ctype<char>::ctype(__locale_struct*, unsigned short const*, bool, unsigned long)(GLIBCXX_3.4) [1] |
ctype<char>::ctype(unsigned short const*, bool, unsigned long)(GLIBCXX_3.4) [1] |
ctype<char>::ctype(__locale_struct*, unsigned short const*, bool, unsigned long)(GLIBCXX_3.4) [1] |
ctype<char>::ctype(unsigned short const*, bool, unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::ctype<wchar_t> class is described by Table 7-241
Table 7-241. Primary vtable for ctype<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for ctype<wchar_t> |
vfunc[0]: | ctype<wchar_t>::~ctype() |
vfunc[1]: | ctype<wchar_t>::~ctype() |
vfunc[2]: | ctype<wchar_t>::do_is(unsigned short, wchar_t) const |
vfunc[3]: | ctype<wchar_t>::do_is(wchar_t const*, wchar_t const*, unsigned short*) const |
vfunc[4]: | ctype<wchar_t>::do_scan_is(unsigned short, wchar_t const*, wchar_t const*) const |
vfunc[5]: | ctype<wchar_t>::do_scan_not(unsigned short, wchar_t const*, wchar_t const*) const |
vfunc[6]: | ctype<wchar_t>::do_toupper(wchar_t) const |
vfunc[7]: | ctype<wchar_t>::do_toupper(wchar_t*, wchar_t const*) const |
vfunc[8]: | ctype<wchar_t>::do_tolower(wchar_t) const |
vfunc[9]: | ctype<wchar_t>::do_tolower(wchar_t*, wchar_t const*) const |
vfunc[10]: | ctype<wchar_t>::do_widen(char) const |
vfunc[11]: | ctype<wchar_t>::do_widen(char const*, char const*, wchar_t*) const |
vfunc[12]: | ctype<wchar_t>::do_narrow(wchar_t, char) const |
vfunc[13]: | ctype<wchar_t>::do_narrow(wchar_t const*, wchar_t const*, char, char*) const |
The Run Time Type Information for the std::ctype<wchar_t> class is described by Table 7-242
An LSB conforming implementation shall provide the architecture specific methods for Class std::ctype<wchar_t> specified in Table 7-243, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-243. libstdcxx - Class ctype<wchar_t> Function Interfaces
ctype<wchar_t>::ctype(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
ctype<wchar_t>::ctype(unsigned long)(GLIBCXX_3.4) [1] |
ctype<wchar_t>::ctype(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
ctype<wchar_t>::ctype(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::codecvt<char, char, __mbstate_t> class is described by Table 7-244
Table 7-244. Primary vtable for codecvt<char, char, __mbstate_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for codecvt<char, char, __mbstate_t> |
vfunc[0]: | codecvt<char, char, __mbstate_t>::~codecvt() |
vfunc[1]: | codecvt<char, char, __mbstate_t>::~codecvt() |
vfunc[2]: | codecvt<char, char, __mbstate_t>::do_out(__mbstate_t&, char const*, char const*, char const*&, char*, char*, char*&) const |
vfunc[3]: | codecvt<char, char, __mbstate_t>::do_unshift(__mbstate_t&, char*, char*, char*&) const |
vfunc[4]: | codecvt<char, char, __mbstate_t>::do_in(__mbstate_t&, char const*, char const*, char const*&, char*, char*, char*&) const |
vfunc[5]: | codecvt<char, char, __mbstate_t>::do_encoding() const |
vfunc[6]: | codecvt<char, char, __mbstate_t>::do_always_noconv() const |
vfunc[7]: | codecvt<char, char, __mbstate_t>::do_length(__mbstate_t&, char const*, char const*, unsigned long) const |
vfunc[8]: | codecvt<char, char, __mbstate_t>::do_max_length() const |
The Run Time Type Information for the std::codecvt<char, char, __mbstate_t> class is described by Table 7-245
The virtual table for the std::__codecvt_abstract_base<char, char, __mbstate_t> class is described by Table 7-246
Table 7-246. Primary vtable for __codecvt_abstract_base<char, char, __mbstate_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for __codecvt_abstract_base<char, char, __mbstate_t> |
vfunc[0]: | |
vfunc[1]: | |
vfunc[2]: | __cxa_pure_virtual |
vfunc[3]: | __cxa_pure_virtual |
vfunc[4]: | __cxa_pure_virtual |
vfunc[5]: | __cxa_pure_virtual |
vfunc[6]: | __cxa_pure_virtual |
vfunc[7]: | __cxa_pure_virtual |
vfunc[8]: | __cxa_pure_virtual |
An LSB conforming implementation shall provide the architecture specific methods for Class std::codecvt<char, char, __mbstate_t> specified in Table 7-247, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-247. libstdcxx - Class codecvt<char, char, __mbstate_t> Function Interfaces
codecvt<char, char, __mbstate_t>::do_length(__mbstate_t&, char const*, char const*, unsigned long) const(GLIBCXX_3.4) [1] |
codecvt<char, char, __mbstate_t>::codecvt(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
codecvt<char, char, __mbstate_t>::codecvt(unsigned long)(GLIBCXX_3.4) [1] |
codecvt<char, char, __mbstate_t>::codecvt(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
codecvt<char, char, __mbstate_t>::codecvt(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::codecvt<wchar_t, char, __mbstate_t> class is described by Table 7-248
Table 7-248. Primary vtable for codecvt<wchar_t, char, __mbstate_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for codecvt<wchar_t, char, __mbstate_t> |
vfunc[0]: | codecvt<wchar_t, char, __mbstate_t>::~codecvt() |
vfunc[1]: | codecvt<wchar_t, char, __mbstate_t>::~codecvt() |
vfunc[2]: | codecvt<wchar_t, char, __mbstate_t>::do_out(__mbstate_t&, wchar_t const*, wchar_t const*, wchar_t const*&, char*, char*, char*&) const |
vfunc[3]: | codecvt<wchar_t, char, __mbstate_t>::do_unshift(__mbstate_t&, char*, char*, char*&) const |
vfunc[4]: | codecvt<wchar_t, char, __mbstate_t>::do_in(__mbstate_t&, char const*, char const*, char const*&, wchar_t*, wchar_t*, wchar_t*&) const |
vfunc[5]: | codecvt<wchar_t, char, __mbstate_t>::do_encoding() const |
vfunc[6]: | codecvt<wchar_t, char, __mbstate_t>::do_always_noconv() const |
vfunc[7]: | codecvt<wchar_t, char, __mbstate_t>::do_length(__mbstate_t&, char const*, char const*, unsigned long) const |
vfunc[8]: | codecvt<wchar_t, char, __mbstate_t>::do_max_length() const |
The Run Time Type Information for the std::codecvt<wchar_t, char, __mbstate_t> class is described by Table 7-249
An LSB conforming implementation shall provide the architecture specific methods for Class std::codecvt<wchar_t, char, __mbstate_t> specified in Table 7-250, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-250. libstdcxx - Class codecvt<wchar_t, char, __mbstate_t> Function Interfaces
codecvt<wchar_t, char, __mbstate_t>::do_length(__mbstate_t&, char const*, char const*, unsigned long) const(GLIBCXX_3.4) [1] |
codecvt<wchar_t, char, __mbstate_t>::codecvt(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
codecvt<wchar_t, char, __mbstate_t>::codecvt(unsigned long)(GLIBCXX_3.4) [1] |
codecvt<wchar_t, char, __mbstate_t>::codecvt(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
codecvt<wchar_t, char, __mbstate_t>::codecvt(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::collate<char> class is described by Table 7-251
Table 7-251. Primary vtable for collate<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for collate<char> |
vfunc[0]: | collate<char>::~collate() |
vfunc[1]: | collate<char>::~collate() |
vfunc[2]: | collate<char>::do_compare(char const*, char const*, char const*, char const*) const |
vfunc[3]: | collate<char>::do_transform(char const*, char const*) const |
vfunc[4]: | collate<char>::do_hash(char const*, char const*) const |
The Run Time Type Information for the std::collate<char> class is described by Table 7-252
An LSB conforming implementation shall provide the architecture specific methods for Class std::collate<char> specified in Table 7-253, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-253. libstdcxx - Class collate<char> Function Interfaces
collate<char>::_M_transform(char*, char const*, unsigned long) const(GLIBCXX_3.4) [1] |
collate<char>::collate(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
collate<char>::collate(unsigned long)(GLIBCXX_3.4) [1] |
collate<char>::collate(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
collate<char>::collate(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::collate<wchar_t> class is described by Table 7-254
Table 7-254. Primary vtable for collate<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for collate<wchar_t> |
vfunc[0]: | collate<wchar_t>::~collate() |
vfunc[1]: | collate<wchar_t>::~collate() |
vfunc[2]: | collate<wchar_t>::do_compare(wchar_t const*, wchar_t const*, wchar_t const*, wchar_t const*) const |
vfunc[3]: | collate<wchar_t>::do_transform(wchar_t const*, wchar_t const*) const |
vfunc[4]: | collate<wchar_t>::do_hash(wchar_t const*, wchar_t const*) const |
The Run Time Type Information for the std::collate<wchar_t> class is described by Table 7-255
An LSB conforming implementation shall provide the architecture specific methods for Class std::collate<wchar_t> specified in Table 7-256, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-256. libstdcxx - Class collate<wchar_t> Function Interfaces
collate<wchar_t>::_M_transform(wchar_t*, wchar_t const*, unsigned long) const(GLIBCXX_3.4) [1] |
collate<wchar_t>::collate(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
collate<wchar_t>::collate(unsigned long)(GLIBCXX_3.4) [1] |
collate<wchar_t>::collate(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
collate<wchar_t>::collate(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::num_get<char, std::istreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-257, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-257. libstdcxx - Class num_get<char, istreambuf_iterator<char, char_traits<char> > > Function Interfaces
num_get<char, istreambuf_iterator<char, char_traits<char> > >::num_get(unsigned long)(GLIBCXX_3.4) [1] |
num_get<char, istreambuf_iterator<char, char_traits<char> > >::num_get(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::num_get<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-258, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-258. libstdcxx - Class num_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
num_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::num_get(unsigned long)(GLIBCXX_3.4) [1] |
num_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::num_get(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-259, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-259. libstdcxx - Class num_put<char, ostreambuf_iterator<char, char_traits<char> > > Function Interfaces
num_put<char, ostreambuf_iterator<char, char_traits<char> > >::_M_group_int(char const*, unsigned long, char, ios_base&, char*, char*, int&) const(GLIBCXX_3.4) [1] |
num_put<char, ostreambuf_iterator<char, char_traits<char> > >::_M_group_float(char const*, unsigned long, char, char const*, char*, char*, int&) const(GLIBCXX_3.4) [1] |
num_put<char, ostreambuf_iterator<char, char_traits<char> > >::_M_pad(char, long, ios_base&, char*, char const*, int&) const(GLIBCXX_3.4) [1] |
num_put<char, ostreambuf_iterator<char, char_traits<char> > >::num_put(unsigned long)(GLIBCXX_3.4) [1] |
num_put<char, ostreambuf_iterator<char, char_traits<char> > >::num_put(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::num_put<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-260, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-260. libstdcxx - Class num_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
num_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::_M_group_int(char const*, unsigned long, wchar_t, ios_base&, wchar_t*, wchar_t*, int&) const(GLIBCXX_3.4) [1] |
num_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::_M_group_float(char const*, unsigned long, wchar_t, wchar_t const*, wchar_t*, wchar_t*, int&) const(GLIBCXX_3.4) [1] |
num_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::_M_pad(wchar_t, long, ios_base&, wchar_t*, wchar_t const*, int&) const(GLIBCXX_3.4) [1] |
num_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::num_put(unsigned long)(GLIBCXX_3.4) [1] |
num_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::num_put(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::bad_cast class is described by Table 7-261
Table 7-261. Primary vtable for bad_cast
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for bad_cast |
vfunc[0]: | bad_cast::~bad_cast() |
vfunc[1]: | bad_cast::~bad_cast() |
vfunc[2]: | exception::what() const |
The Run Time Type Information for the std::bad_cast class is described by Table 7-262
No external methods are defined for libstdcxx - Class std::bad_cast
The Run Time Type Information for the std::ios_base class is described by Table 7-263
No external methods are defined for libstdcxx - Class std::ios_base
The virtual table for the std::messages<char> class is described by Table 7-264
Table 7-264. Primary vtable for messages<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for messages<char> |
vfunc[0]: | messages<char>::~messages() |
vfunc[1]: | messages<char>::~messages() |
vfunc[2]: | messages<char>::do_open(basic_string<char, char_traits<char>, allocator<char> > const&, locale const&) const |
vfunc[3]: | messages<char>::do_get(int, int, int, basic_string<char, char_traits<char>, allocator<char> > const&) const |
vfunc[4]: | messages<char>::do_close(int) const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::messages<char> specified in Table 7-265, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-265. libstdcxx - Class messages<char> Function Interfaces
messages<char>::messages(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
messages<char>::messages(unsigned long)(GLIBCXX_3.4) [1] |
messages<char>::messages(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
messages<char>::messages(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::messages<wchar_t> class is described by Table 7-266
Table 7-266. Primary vtable for messages<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for messages<wchar_t> |
vfunc[0]: | messages<wchar_t>::~messages() |
vfunc[1]: | messages<wchar_t>::~messages() |
vfunc[2]: | messages<wchar_t>::do_open(basic_string<char, char_traits<char>, allocator<char> > const&, locale const&) const |
vfunc[3]: | messages<wchar_t>::do_get(int, int, int, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&) const |
vfunc[4]: | messages<wchar_t>::do_close(int) const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::messages<wchar_t> specified in Table 7-267, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-267. libstdcxx - Class messages<wchar_t> Function Interfaces
messages<wchar_t>::messages(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
messages<wchar_t>::messages(unsigned long)(GLIBCXX_3.4) [1] |
messages<wchar_t>::messages(__locale_struct*, char const*, unsigned long)(GLIBCXX_3.4) [1] |
messages<wchar_t>::messages(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::numpunct<char> class is described by Table 7-268
Table 7-268. Primary vtable for numpunct<char>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for numpunct<char> |
vfunc[0]: | numpunct<char>::~numpunct() |
vfunc[1]: | numpunct<char>::~numpunct() |
vfunc[2]: | numpunct<char>::do_decimal_point() const |
vfunc[3]: | numpunct<char>::do_thousands_sep() const |
vfunc[4]: | numpunct<char>::do_grouping() const |
vfunc[5]: | numpunct<char>::do_truename() const |
vfunc[6]: | numpunct<char>::do_falsename() const |
The Run Time Type Information for the std::numpunct<char> class is described by Table 7-269
An LSB conforming implementation shall provide the architecture specific methods for Class std::numpunct<char> specified in Table 7-270, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-270. libstdcxx - Class numpunct<char> Function Interfaces
numpunct<char>::numpunct(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
numpunct<char>::numpunct(__numpunct_cache<char>*, unsigned long)(GLIBCXX_3.4) [2] |
numpunct<char>::numpunct(unsigned long)(GLIBCXX_3.4) [2] |
numpunct<char>::numpunct(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
numpunct<char>::numpunct(__numpunct_cache<char>*, unsigned long)(GLIBCXX_3.4) [2] |
numpunct<char>::numpunct(unsigned long)(GLIBCXX_3.4) [2] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The virtual table for the std::numpunct<wchar_t> class is described by Table 7-271
Table 7-271. Primary vtable for numpunct<wchar_t>
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for numpunct<wchar_t> |
vfunc[0]: | numpunct<wchar_t>::~numpunct() |
vfunc[1]: | numpunct<wchar_t>::~numpunct() |
vfunc[2]: | numpunct<wchar_t>::do_decimal_point() const |
vfunc[3]: | numpunct<wchar_t>::do_thousands_sep() const |
vfunc[4]: | numpunct<wchar_t>::do_grouping() const |
vfunc[5]: | numpunct<wchar_t>::do_truename() const |
vfunc[6]: | numpunct<wchar_t>::do_falsename() const |
The Run Time Type Information for the std::numpunct<wchar_t> class is described by Table 7-272
An LSB conforming implementation shall provide the architecture specific methods for Class std::numpunct<wchar_t> specified in Table 7-273, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-273. libstdcxx - Class numpunct<wchar_t> Function Interfaces
numpunct<wchar_t>::numpunct(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
numpunct<wchar_t>::numpunct(unsigned long)(GLIBCXX_3.4) [1] |
numpunct<wchar_t>::numpunct(__locale_struct*, unsigned long)(GLIBCXX_3.4) [1] |
numpunct<wchar_t>::numpunct(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::time_get<char, std::istreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-274
Table 7-274. Primary vtable for time_get<char, istreambuf_iterator<char, char_traits<char> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for time_get<char, istreambuf_iterator<char, char_traits<char> > > |
vfunc[0]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::~time_get() |
vfunc[1]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::~time_get() |
vfunc[2]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_date_order() const |
vfunc[3]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_time(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[4]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_date(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[5]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_weekday(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[6]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_monthname(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[7]: | time_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get_year(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, ios_base&, _Ios_Iostate&, tm*) const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_get<char, std::istreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-275, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-275. libstdcxx - Class time_get<char, istreambuf_iterator<char, char_traits<char> > > Function Interfaces
time_get<char, istreambuf_iterator<char, char_traits<char> > >::_M_extract_num(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, int&, int, int, unsigned long, ios_base&, _Ios_Iostate&) const(GLIBCXX_3.4) [1] |
time_get<char, istreambuf_iterator<char, char_traits<char> > >::_M_extract_name(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, int&, char const**, unsigned long, ios_base&, _Ios_Iostate&) const(GLIBCXX_3.4) [1] |
time_get<char, istreambuf_iterator<char, char_traits<char> > >::time_get(unsigned long)(GLIBCXX_3.4) [1] |
time_get<char, istreambuf_iterator<char, char_traits<char> > >::time_get(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::time_get<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-276
Table 7-276. Primary vtable for time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > > |
vfunc[0]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~time_get() |
vfunc[1]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~time_get() |
vfunc[2]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_date_order() const |
vfunc[3]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_time(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[4]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_date(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[5]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_weekday(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[6]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_monthname(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
vfunc[7]: | time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get_year(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, ios_base&, _Ios_Iostate&, tm*) const |
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_get<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-277, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-277. libstdcxx - Class time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::_M_extract_num(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, int&, int, int, unsigned long, ios_base&, _Ios_Iostate&) const(GLIBCXX_3.4) [1] |
time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::_M_extract_name(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, int&, wchar_t const**, unsigned long, ios_base&, _Ios_Iostate&) const(GLIBCXX_3.4) [1] |
time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_get(unsigned long)(GLIBCXX_3.4) [1] |
time_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_get(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-278, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-278. libstdcxx - Class time_put<char, ostreambuf_iterator<char, char_traits<char> > > Function Interfaces
time_put<char, ostreambuf_iterator<char, char_traits<char> > >::time_put(unsigned long)(GLIBCXX_3.4) [1] |
time_put<char, ostreambuf_iterator<char, char_traits<char> > >::time_put(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
An LSB conforming implementation shall provide the architecture specific methods for Class std::time_put<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-279, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-279. libstdcxx - Class time_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
time_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_put(unsigned long)(GLIBCXX_3.4) [1] |
time_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::time_put(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::bad_alloc class is described by Table 7-280
Table 7-280. Primary vtable for bad_alloc
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for bad_alloc |
vfunc[0]: | bad_alloc::~bad_alloc() |
vfunc[1]: | bad_alloc::~bad_alloc() |
vfunc[2]: | exception::what() const |
The Run Time Type Information for the std::bad_alloc class is described by Table 7-281
No external methods are defined for libstdcxx - Class std::bad_alloc
The virtual table for the std::basic_ios<char, std::char_traits<char> > class is described by Table 7-282
No external methods are defined for libstdcxx - Class std::basic_ios<char, std::char_traits<char> >
No external methods are defined for libstdcxx - Class std::basic_ios<wchar_t, std::char_traits<wchar_t> >
The virtual table for the std::exception class is described by Table 7-283
Table 7-283. Primary vtable for exception
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for exception |
vfunc[0]: | exception::~exception() |
vfunc[1]: | exception::~exception() |
vfunc[2]: | exception::what() const |
The Run Time Type Information for the std::exception class is described by Table 7-284
No external methods are defined for libstdcxx - Class std::exception
The virtual table for the std::money_get<char, std::istreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-285
Table 7-285. Primary vtable for money_get<char, istreambuf_iterator<char, char_traits<char> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for money_get<char, istreambuf_iterator<char, char_traits<char> > > |
vfunc[0]: | money_get<char, istreambuf_iterator<char, char_traits<char> > >::~money_get() |
vfunc[1]: | money_get<char, istreambuf_iterator<char, char_traits<char> > >::~money_get() |
vfunc[2]: | money_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, bool, ios_base&, _Ios_Iostate&, long double&) const |
vfunc[3]: | money_get<char, istreambuf_iterator<char, char_traits<char> > >::do_get(istreambuf_iterator<char, char_traits<char> >, istreambuf_iterator<char, char_traits<char> >, bool, ios_base&, _Ios_Iostate&, basic_string<char, char_traits<char>, allocator<char> >&) const |
The Run Time Type Information for the std::money_get<char, std::istreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-286
An LSB conforming implementation shall provide the architecture specific methods for Class std::money_get<char, std::istreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-287, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-287. libstdcxx - Class money_get<char, istreambuf_iterator<char, char_traits<char> > > Function Interfaces
money_get<char, istreambuf_iterator<char, char_traits<char> > >::money_get(unsigned long)(GLIBCXX_3.4) [1] |
money_get<char, istreambuf_iterator<char, char_traits<char> > >::money_get(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::money_get<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-288
Table 7-288. Primary vtable for money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > > |
vfunc[0]: | money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~money_get() |
vfunc[1]: | money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~money_get() |
vfunc[2]: | money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, bool, ios_base&, _Ios_Iostate&, long double&) const |
vfunc[3]: | money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_get(istreambuf_iterator<wchar_t, char_traits<wchar_t> >, istreambuf_iterator<wchar_t, char_traits<wchar_t> >, bool, ios_base&, _Ios_Iostate&, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> >&) const |
The Run Time Type Information for the std::money_get<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-289
An LSB conforming implementation shall provide the architecture specific methods for Class std::money_get<wchar_t, std::istreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-290, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-290. libstdcxx - Class money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::money_get(unsigned long)(GLIBCXX_3.4) [1] |
money_get<wchar_t, istreambuf_iterator<wchar_t, char_traits<wchar_t> > >::money_get(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::money_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-291
Table 7-291. Primary vtable for money_put<char, ostreambuf_iterator<char, char_traits<char> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for money_put<char, ostreambuf_iterator<char, char_traits<char> > > |
vfunc[0]: | money_put<char, ostreambuf_iterator<char, char_traits<char> > >::~money_put() |
vfunc[1]: | money_put<char, ostreambuf_iterator<char, char_traits<char> > >::~money_put() |
vfunc[2]: | money_put<char, ostreambuf_iterator<char, char_traits<char> > >::do_put(ostreambuf_iterator<char, char_traits<char> >, bool, ios_base&, char, long double) const |
vfunc[3]: | money_put<char, ostreambuf_iterator<char, char_traits<char> > >::do_put(ostreambuf_iterator<char, char_traits<char> >, bool, ios_base&, char, basic_string<char, char_traits<char>, allocator<char> > const&) const |
The Run Time Type Information for the std::money_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > > class is described by Table 7-292
An LSB conforming implementation shall provide the architecture specific methods for Class std::money_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > > specified in Table 7-293, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-293. libstdcxx - Class money_put<char, ostreambuf_iterator<char, char_traits<char> > > Function Interfaces
money_put<char, ostreambuf_iterator<char, char_traits<char> > >::money_put(unsigned long)(GLIBCXX_3.4) [1] |
money_put<char, ostreambuf_iterator<char, char_traits<char> > >::money_put(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::money_put<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-294
Table 7-294. Primary vtable for money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > > |
vfunc[0]: | money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~money_put() |
vfunc[1]: | money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::~money_put() |
vfunc[2]: | money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_put(ostreambuf_iterator<wchar_t, char_traits<wchar_t> >, bool, ios_base&, wchar_t, long double) const |
vfunc[3]: | money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::do_put(ostreambuf_iterator<wchar_t, char_traits<wchar_t> >, bool, ios_base&, wchar_t, basic_string<wchar_t, char_traits<wchar_t>, allocator<wchar_t> > const&) const |
The Run Time Type Information for the std::money_put<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > class is described by Table 7-295
An LSB conforming implementation shall provide the architecture specific methods for Class std::money_put<wchar_t, std::ostreambuf_iterator<wchar_t, std::char_traits<wchar_t> > > specified in Table 7-296, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-296. libstdcxx - Class money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > > Function Interfaces
money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::money_put(unsigned long)(GLIBCXX_3.4) [1] |
money_put<wchar_t, ostreambuf_iterator<wchar_t, char_traits<wchar_t> > >::money_put(unsigned long)(GLIBCXX_3.4) [1] |
Referenced Specification(s)
The virtual table for the std::strstream class is described by Table 7-297
Table 7-297. Primary vtable for strstream
Base Offset | 0 |
Virtual Base Offset | 112 |
RTTI | typeinfo for strstream |
vfunc[0]: | strstream::~strstream() |
vfunc[1]: | strstream::~strstream() |
Table 7-298. Secondary vtable for strstream
Base Offset | -16 |
Virtual Base Offset | 96 |
RTTI | typeinfo for strstream |
vfunc[0]: | non-virtual thunk to strstream::~strstream() |
vfunc[1]: | non-virtual thunk to strstream::~strstream() |
Table 7-299. Secondary vtable for strstream
Base Offset | -112 |
Virtual Base Offset | -112 |
RTTI | typeinfo for strstream |
vfunc[0]: | virtual thunk to strstream::~strstream() |
vfunc[1]: | virtual thunk to strstream::~strstream() |
The VTT for the std::strstream class is described by Table 7-300
An LSB conforming implementation shall provide the architecture specific methods for Class std::strstream specified in Table 7-301, with the full mandatory functionality as described in the referenced underlying specification.
Table 7-301. libstdcxx - Class strstream Function Interfaces
non-virtual thunk to strstream::~strstream()(GLIBCXX_3.4) [1] |
non-virtual thunk to strstream::~strstream()(GLIBCXX_3.4) [1] |
virtual thunk to strstream::~strstream()(GLIBCXX_3.4) [1] |
virtual thunk to strstream::~strstream()(GLIBCXX_3.4) [1] |
Referenced Specification(s)
[1]. Itanium C++ ABI
The Run Time Type Information for the std::time_base class is described by Table 7-302
No external methods are defined for libstdcxx - Class std::time_base
The virtual table for the std::type_info class is described by Table 7-303
Table 7-303. Primary vtable for type_info
Base Offset | 0 |
Virtual Base Offset | 0 |
RTTI | typeinfo for type_info |
vfunc[0]: | type_info::~type_info() |
vfunc[1]: | type_info::~type_info() |
vfunc[2]: | type_info::__is_pointer_p() const |
vfunc[3]: | type_info::__is_function_p() const |
vfunc[4]: | type_info::__do_catch(type_info const*, void**, unsigned int) const |
vfunc[5]: | type_info::__do_upcast(__cxxabiv1::__class_type_info const*, void**) const |
The Run Time Type Information for the std::type_info class is described by Table 7-304
No external methods are defined for libstdcxx - Class std::type_info
No external methods are defined for libstdcxx - Class std::basic_istream<char, std::char_traits<char> >
No external methods are defined for libstdcxx - Class std::basic_ostream<char, std::char_traits<char> >
Version 1.1, March 2000
Copyright (C) 2000 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
The purpose of this License is to make a manual, textbook, or other written document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.
This License applies to any manual or other work that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you".
A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (For example, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.
The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License.
The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License.
A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, whose contents can be viewed and edited directly and straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup has been designed to thwart or discourage subsequent modification by readers is not Transparent. A copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML designed for human modification. Opaque formats include PostScript, PDF, proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML produced by some word processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text.
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.
You may also lend copies, under the same conditions stated above, and you may publicly display copies.
If you publish printed copies of the Document numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a publicly-accessible computer-network location containing a complete Transparent copy of the Document, free of added material, which the general network-using public has access to download anonymously at no charge using public-standard network protocols. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.
You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:
Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.
List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has less than five).
State on the Title page the name of the publisher of the Modified Version, as the publisher.
Preserve all the copyright notices of the Document.
Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.
Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice.
Include an unaltered copy of this License.
Preserve the section entitled "History", and its title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
In any section entitled "Acknowledgements" or "Dedications", preserve the section's title, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.
Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.
Delete any section entitled "Endorsements". Such a section may not be included in the Modified Version.
Do not retitle any existing section as "Endorsements" or to conflict in title with any Invariant Section.
If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles.
You may add a section entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.
You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice.
The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.
In the combination, you must combine any sections entitled "History" in the various original documents, forming one section entitled "History"; likewise combine any sections entitled "Acknowledgements", and any sections entitled "Dedications". You must delete all sections entitled "Endorsements."
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.
You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.
A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, does not as a whole count as a Modified Version of the Document, provided no compilation copyright is claimed for the compilation. Such a compilation is called an "aggregate", and this License does not apply to the other self-contained works thus compiled with the Document, on account of their being thus compiled, if they are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one quarter of the entire aggregate, the Document's Cover Texts may be placed on covers that surround only the Document within the aggregate. Otherwise they must appear on covers around the whole aggregate.
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License provided that you also include the original English version of this License. In case of a disagreement between the translation and the original English version of this License, the original English version will prevail.
You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation.
To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:
Copyright (c) YEAR YOUR NAME. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. A copy of the license is included in the section entitled "GNU Free Documentation License".
If you have no Invariant Sections, write "with no Invariant Sections" instead of saying which ones are invariant. If you have no Front-Cover Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being LIST"; likewise for Back-Cover Texts.
If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.